Suitable for A310 V6 (Phase 2): From chassis 47709 to end of series (From 1981)
Out of stock
Alpine A310 V6 Rear Axle
Our spare parts for the rear axle of the Alpine A310 V6
Discover here a wide choice of parts to maintain or restore the rear axle of your Alpine A310 V6
Whether you are looking for shock absorbers, bellows, complete upper and lower wishbones, wishbone axle, gearbox silentbloc, engine mount, stabilizer bar tie rod, hub bearing, wheel bearing,...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old one back to life with quality components.
Triangle sold with its silentblocs (x4)
Suitable for:
A310 V6 (Phase 2): From chassis 47709 to the end of series(From 1981)
R5 Turbo 1 and 2 (8220)
Out of stock
Suitable for:
A310.V6: Upper and lower rear wishbone - All models (pre and after 1980)
R5 Turbo: Upper and Lower Rear Triangle
Out of stock
In stock
In stock
In stock
In stock
In stock
In stock
Suitable for:
A110.1600 SC / SI (VD) / SX (VH)
A310.4
A310 V6 (Before and after 1980): From n°43796 to end of series.
R5 Turbo
Out of stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer
In stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer.
In stock
Out of stock
Out of stock
Out of stock
In stock
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Suitable for: A310.4: 1600VE n°1066 at the end and 1600VF n°21066 at the end A310.6: Before 1980 (n°1 to n°47708)
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4 (All models)
A310 V6 (From number 1 to number 47709)
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4 (All models)
A310 V6 (From number 1 to number 47709)
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4(All models)
A310 V6 (From #1 to #47709)
In stock
Ref OE Alpine / Renault : 6000008081
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Wheel-side bowl diameter: Ø 82mm
Drive shaft diameter: Ø 25mm
Out of stock
In stock
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock