Door barrel seal Ø 20mm (Interior) - R5 / A110.1600 (SX.SC.SI) and V85 / A310.4 / A310V6 (Before 1981) - Ref 7700537758

sold with its plate and seals

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.

sold by pair

Segment Characteristics:

• • Segment Diameter:Ø 88mm
  • Thickness of Upper Segments (Fire-resistant): 1.5mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.