Delivery in France only
Recommended paint for decorating and protecting the exhaust manifold
Resistant up to 600°C
In stock
Best sellers
In stock
Œil de fixation inférieur largeur : 21mm
Diamètre intérieur d'œil de fixation inférieur : Ø 9mm
In stock
In stock
Suitable for the following vehicles:
R4: Billancourt engine 747cm³ / 782cm³ (Type 680-02) / 845cm³ (Type B1B and 800-...)
R5 (R1221 , R1391 , R1220): Billancourt engine 845cm³ (Type 800-10)
Renault OE Ref: 8557892 /...
In stock
Strainer to recover from the old pump
Suitable for type 688 / 689 engines:
Caravelle / R8 (1130 / 1132 / 1136)
Matradjet (1108cc)
Alpine GT4 (1100cc)
In stock
Dimensions of the Large Spring:
Outer Diameter: Ø 35.90mm
Inner Diameter: Ø 27.80mm
Wire Diameter: Ø 4.1mm
Free Height (overall): 49.50mm
Dimensions of the Small Spring:
Outer Diameter: Ø 25.90mm
Inner Diameter: Ø...
In stock
Length under head: 37mm
Significantly higher strength than the original, ideal for tuned engines
In stock
Limited special offer
In stock
In stock
In stock
- Overall length: 255 cm
- Sheath length: 231 cm
- Cable length: 244.5 cm
In stock
Out of stock
Alpine OE Ref: 7700268488 / 7700268728
In stock
In stock
In stock
In stock
Suitable for carburettor WEBER 40DCOE / 45DCOE
To ensure a perfect seal between the mixture screw and the carburettor body (do not forget the support cup)
sold individually, need 2 pieces for a carburettor
Number...
In stock
Tools to use with a 1/2 ratchet
Out of stock
In stock
Delivery in France only
Use for rust removal:
Dilute 50% in water
Apply with a brush or by soaking, without letting the product dry
Rinse with water
Also suitable for cleaning radiators and cooling systems.
In stock
In stock
Cleans contacts and ensures electrical connections close.
Protects against moisture.
Delivery in France only
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4(All models)
A310 V6 (From #1 to #47709)
In stock
In stock
In stock
Suitable for Billancourt engine:
Engine 845cm³ (Type 800-1 / 800-2 / 800-3 / 800-05 / B1B-07)
Bore Ø 58mm base Ø 62.5mm
For assembly with paper base gasket
New! Assembly of the pins with circlips to facilitate...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Original type screw with slotted recess
In stock
In stock
Suitable for GOTTI rims
Suitable for rims with a diameter of 60mm
Outer diameter of the cover: Ø 64.5mm
Diameter of the adhesive pad location: Ø 45mm
In stock
Suitable for WEBER 40DCOE and 45DCOE
sold individually, need 2 pieces for one carburettor
Part number 46 on exploded view
Compatible with other WEBER carburettors, see below
In stock
In stock
Inner diameter: Ø 18mm
Outer diameter: Ø 42mm
Height: 42mm
Out of stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
In stock
In stock
In stock
In stock
In stock
Connection:Male / Male: Ø 11/16"-16UNF (Ø 17.16mm)
Length:42cm (Overall)
Suitable for:
4CV:(From early 1946 to early 1951)
Juvaquatre (1st model):From early to 06/1954 (Except R2100 / R2101)
OE Renault /...
In stock
sold with the water pump joint
In stock
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "Road" shock absorbers, ideal for use on the road and for competition.
In stock
In stock
In stock
