Best sellers
In stock
In stock
Out of stock
In stock
Also suitable for the strip on the driver's and passenger's door panels.
In stock
In stock
In stock
In stock
Suitable for engines:
Engine Type 670-05: Dauphine Gordini (R1093 / R1095) / Estafette / Floride (R1092) / A106 / A108
Engine Billancourt Type 680-... and 800-...: R4 / 4L / R5
Valve with low keyway
Valve sold...
In stock
Material: mixed fibers, acrylic and wool
Thickness: 9mm
Width: 1 meter
Sold by the linear meter
In stock
Longueur hors tout : 232cm
Longueur de la gaine : 192cm
Longueur du câble : 221,5cm
Nos câbles sont de fabrication française et répondent aux normes d’assemblage et de qualité des câbles de première monte (origine)...
In stock
In stock
Intake ducts: Ø 33mm
Out of stock
Mounting eye width: 21mm
Lower mounting screw: Ø 9mm
Comfort shock absorbers with road-ready damping.
Suitable for:
R8.G (R1134 / R1135) from 10/1964 to 1974
Alpine A110: 1100cc / 1300cc / 1600cc
Alpine GT4 (Rear...
In stock
In stock
Hollow washer stamped stainless steel for countersunk screws
Ideal for fixing:
Headlining
Interior trim, carpets, rugs, etc.
Rubber mats
In stock
Gasket dimensions: Ø 20x12x1mm
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 2 and number 69 on exploded view
Sold individually, 1 piece required for one carburetor
Compatible with other WEBER carburetors,...
In stock
In stock
In stock
In stock
The reinforced tie rod and ball joint kit (M14x150) replaces the original M12x100 tie rods and ball joints without any modification.
It is possible to install it on an A310.4 using the AVP7609 adapter to replace the...
In stock
Suitable for:
R5 Alpine (1223)
R5 Alpine Turbo (122B)
In stock
Mounting center distance: 67mm
Mounting hole diameter: Ø 11mm
Crimping diameter: Ø 42mm
OE Renault Ref: 7701020148 / 7701023607
Two gaskets required - Sold individually
Out of stock
In stock
In stock
Bearing Dimensions:
Dimension: Stock dimension (Standard)
Journal Diameter (A): Ø 51.97mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 1.92mm
Smooth...
In stock
In stock
In stock
Length: 32.5cm
Male / Female Connection: Ø 3/8"-24UNF
Suitable for:
Simca 1000 / 1000Rallye / Rallye 1: Rear drum brake (ARG)
Simca R2 / R3 / 1200S / CG (B1200 / C1300): Rear disc brake (Intermediate ARG)
R12G:...
In stock
Bearing Dimensions:
Dimension: Stock Dimension (Standard)
Journal Diameter (A): Ø 54.80mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 20.50mm
Bearing Thickness (D): 1.95mm
Smooth, lug-type bearings with grease...
In stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
In stock
In stock
Center distance between the 2 fixing screws: 50mm
Length of the plate (Base): 94mm
Out of stock
Suitable for:
A110.1600 S / R12.G / R17.G
A310.4 (VE and VF)
Simca Rallye 2 and Rallye 3 (Prepared engine)
In stock
Screw diameter: M8x100
Overall length: 28.35mm
Threaded length: 19mm
Supplied with locking nut
In stock
In stock
In stock
Renault ref: 7866038000 / 6000002006
Ref Simca: 23408T
In stock
Harness for mounting with the coil on the rear skirt
Coil wire length: 53cm
Ignition wire length: 53cm / 55cm / 60cm / 64.5cm
This ignition harness consists of4 spark plug wires and 1coil wire.
We would like to point...
In stock
Out of stock
In stock