Front bonnet round stopper - Juva 4

Convient pour les boites de vitesse type : 289 / 314 /316 / 318 /325

Specialized valve stem seals for 6mm diameter valves

• Valve stem seal dimensions: Ø 5.5x11mm
• Material: Specialized rubber

This brake limiter replaces the original non-adjustable rear brake proportioning valve.

The limiter is not load-dependent (it does not vary according to the vehicle's load).

Its adjustment is manual, using the calibration screw. Adjustment can be made either statically, using brake pressure gauges and referring to the manufacturer's data, or dynamically (see description below).

Limiter specifications:

• Inlet thread (x1): 3/8-24UNF (Male cone)
• Outlet thread (x2): 3/8-24UNF (Male Taper)
• Mounting Screw Hole Diameter: Ø 8.5mm
• Limiter Adjustment Range: 5 turns
• Limiter delivered unadjusted (screw loosened): Rear brake pressure limited to maximum

TRW paste is used for the repair, assembly, and preservation of hydraulic brake components—such as brake calipers—that require special greases for reassembly.

Compatible with all brake fluids for the installation of seals and any components in contact with brake fluid, such as master cylinders and wheel cylinders.

• Tube size: 25g