Upper Ball Joint Right or Left (Axle M10x125 - Cone Ø 11.50mm to Ø 13mm) - R4 (From 1969 to the end) / R5 (All models)

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 43.98mm
• Housing Diameter (B): Ø 47.62mm
• Bearing Width (C): 17.75mm
• Bearing Thickness (D): 1.80mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material: Bimetal

Sold with two identical keys for the doors and the rear hood

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• 12V electronic ignition kit , with magnetic trigger which allows the elimination of the breakers and the capacitor
• Notice included
• Supplied with 3 screws for fixing the plate
• Instructions included

• Tools to use with a 1/2 ratchet

• Hardness of the silentblock rubber: 75 Shores

The entire kit is composed of 3/8"-24UNF and M10x100 fittings

This kit is composed of the following copper pipes:

- From the brake master cylinder to the Right Front Wheel

- From the brake master cylinder to the Left Front Wheel

- From the brake master cylinder to the rear distributor

- From the rear splitter to the right rear arm

- From the rear splitter to the rear left arm

-From the Right Rear arm to the Right Rear wheel

-From the Rear Left arm to the Rear Left wheel