Best sellers
In stock
Suitable for WEBER 40DCOE, 45DCOE and IDF carburetors
Sold individually, requires 2 pieces per carburetor
Number 31 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
Out of stock
In stock
In stock
Out of stock
Complete wishbone with ball joint and silentbloc (x2)
Wishbone equipped with suspension ball joints (AVP 5309): M10x125 axle - Cone Ø 11.50mm to Ø 13mm
Suitable for R4 / 4L: From 1969 to end of series
In stock
In stock
In stock
Limited special offer
In stock
In stock
In stock
In stock
In stock
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Out of stock
Suitable for vehicles:
A310.4: VF and VE (From chassis no. 910 to the end)
A310 V6
In stock
Diameter of the 3 holes for the strike plate mounting screws: M8x100
In stock
In stock
In stock
In stock
Segment Characteristics:
Segment Diameter:Ø 58mm
Thickness of Upper Segments (Fire-resistant): 2mm
Thickness of Intermediate Segments (Waterproof): 2mm
Lower piston ring thickness (scraper): 3.5mm
It is essential to...
In stock
For interior door, sold in pairs (right and left)
Out of stock
Strainer to be reused from the old oil pump
Suitable for type 688 (1108cc engine) and 689 (956cc engine) engines:
Flordie / Caravelle
R8 (R1130 / R1132 / R1136)
Matradjet (1108cc engine)
Alpine GT4 (1108cc...
In stock
Length under head: 37mm
Significantly higher strength than the original, ideal for tuned engines
In stock
Segment Characteristics:
Segment Diameter: Ø 70mm
Thickness of Upper Segments (Fire-resistant): 2mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 3.5mm
It is essential to check...
In stock
In stock
In stock
Sold individually, need 2 pieces per car
In stock
Shipping available. Contact us to obtain a transport quote and find out our conditions.
Click HERE to write to us.
In stock
Out of stock
In stock
The kits are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 74.5mm
Cylinder...
In stock
Suitable for first generation WEBER 40DCOE and 45DCOE carburetors
Sold individually, requires 2 pieces for one carburetor
Number 56 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for front or rear (need 2 sets for one car)
Competition type pads, efficient in cold and high temperatures,
Friction coefficient of 0.43 µ,
Use reserved for competition, do not use these pads on public...
In stock
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4(All models)
A310 V6 (From #1 to #47709)
In stock
Renault 4
Renault R5 / R5 alpine (1223) / R5 alpine turbo (122B)
In stock
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "sporty driving" shock absorbers, ideal for road and competition use.
In stock
Dimension of the axis of the upper fixing bolt at the support of the 1st washer.
In stock
In stock
Out of stock
Overall length: 229.5 cm
Sheath length: 188 cm
Cable length: 226 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Out of stock
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
In stock
Overall length: 215 cm
Sheath length: 201 cm
Cable length: 208 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
In stock
Tie rod adjustment range: 9.5cm to 11.5cm
The tie rod can be cut to size to make it shorter
In stock
Black base
Sold without festoon bulb: Reference AVP1820
In stock
In stock
In stock
Cylinder head gasket with cylindrical holes Ø 71mm
In stock