Rear aluminum skid plate for protection under the engine and gearbox (Sold individually) - A110 1600
Aluminum protection plate thickness: 5 mm
Out of stock
Best sellers
ELF EVOLUTION R-TECH SPORT 0W-40 has been designed to meet the specifications of Renault Sport and Alpine engines:
International Specifications: ACEA C3
Approved Manufacturer Specifications: RENAULT RN17 RSA...
In stock
Rigid "Grey" leatherette trim mounted on hardboard
Trims to glue or screw
Kit includes: Two center pillars and two rear wheel arches
In stock
Rigid "Grey Bark" colored fabric trim mounted on hardboard
Trims to glue or screw
Kit includes: Two center pillars and two rear wheel arches
In stock
Seat cover in blue leatherette and plaid fabric (Blue / Green and red)
Red piping on the edge of the seats.
Kit contents:
Front seat cover: Seat, backrest and headrest
Rear seat cover: Seat and backrest
In stock
Kit of 4 interior door panels in gray imitation leather and fabric in "Red Scottish" color - R4 / 4L
Inner door panels in gray leatherette with plaid (red/blue and gray) mounted on hardboard
Set of 4 trim pieces for the two front doors and two rear doors
Drilled to insert the original mounting clips. (Requires 56...
In stock
Interior door trim in "Brown Bark" fabric and rigid storage compartment mounted on hardboard
Fabric trim to be glued to the bottom of the door with neoprene glue; no drilling is required.
Compatible with all 4CV...
In stock
Adaptable leather gear knob with visible stitching
Knob dimensions:
Knob diameter: Ø 47.5mm
Knob height: 60mm
Supplied with 3 different tips to fit all types of levers (screwed or glued):
Chrome screw-on tip:...
In stock
Hose Specifications:
Overall Length: 375mm
Thread/Tap: Male M10x100 and Female M10x100
Suitable for: Rear Right or Rear Left
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
In stock
Mounting center distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault...
In stock
Bearing Dimensions (Sold in packs of 12):
Crankshaft Diameter: Ø 52.00mm
Bearing Diameter: Ø 56.00mm
Width: 17.65mm
Thickness: 2.14mm
Suitable for the following engines:
Alpine A310 V6: PRV 112.730 Engine
Alpine V6...
In stock
Suitable for 1100/1300 GORDINI
Supplied with M7 stud, washer, and nut
In stock
Dimensions: 660mm x 505mm
Must only be installed with AVP ref 699042 + AVP 699043 + AVP 699044 + AVP 699045
Warning: Carefully check the dimensions of the luggage compartment
In stock
Warning: This part number must only be installed for a luggage compartment measuring 660mm x 450mm
Must only be installed with part numbers AVP 699036 + AVP 699038 + AVP 699039 + AVP 699040
Warning: Check the...
In stock
Warning: This part number must only be installed in a luggage compartment measuring 660mm x 450mm
Must only be installed with part number AVP 699036 + AVP 699038 + AVP699039 + AVP 699040
Warning: Please check the...
In stock
Black quilted trim for the Renault Alpine A110 center tunnel
Black faux leather sewn onto 12mm thick foam
For body tunnels after 1968, width 100mm
In stock
Right-side quilted trim for Renault Alpine A110
Black faux leather sewn onto 12mm thick foam
Recommended installation with BOSTIK glue Ref,,,,,,,,,,,,,,,,
In stock
Alpine A110 Headliner in Faux Leather (1972-1977)
The headliner is cut wider to provide more room for installation.
In stock
Complete carpet and leatherette interior for Alpine A110 1600 SX
Black color
Premium quality, made in France
Carpets and leatherette strictly conform to the original
Kit components and details are shown in the...
In stock
Complete carpet and leatherette interior for Alpine A110 1600 SC
Black color
Premium quality, made in France
Carpets and leatherette strictly conform to the original
Kit details and components as shown in the...
In stock
Oil-filled shock absorbers with standard calibration (Super Comfort range)
Supplied with silentblocs, mounting washers, and spring retainers
Height under spring retainer (See dimension H): 177mm
Suitable for:
R12...
In stock
Sheets (x4)
Sheet Dimensions:
Sheet Bore Diameter: Ø 77.8mm
Sheet Flange or Top Diameter (D): Ø 96mm
Sheet Base Diameter (A): Ø 82.50mm
Sheet Height (including skirts, overall) (C): 143.50mm
Sheet Height to Base...
In stock
The sets are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 77.75mm
Cylinder...
In stock
Length under head: 40.5mm
Significantly greater strength than the original, ideal for tuned engines.
Suitable for:
Renault Clio 1.8 L 16S (F7P Engine)
Clio Williams 2.0L 16S (F7R Engine)
Clio RS 2.0L 16S (F4R Engine)
In stock
Fits driver or passenger side
Slider adjustment range: 120mm forward and 93mm rearward
Slider height: 24mm
Double locking mechanism
Compatible with AVP 69118 and AVP 69119 seats
Out of stock
Mahogany steering wheel with glossy zebrawood finish and anatomic rear section
Entirely handcrafted steering wheel
Steering wheel outer diameter: Ø 350mm
Flushing: 37mm
Steering wheel cross-section: 27mm
Hub mounting...
In stock
Allows control of nozzle calibration
Graduation is 0.10 mm in 0.10 mm increments, with a minimum of 1.5 mm to 3.00 mm and a maximum of 1.5 mm.
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.75)
Junnel Diameter (A): Ø 54.05mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 19.50mm
Bearing Thickness (D): 2.32mm
Smooth, lug-type bearings with grease...
In stock
Limited special offer
In stock
- For long master cylinder push rod
- Piston depth 38mm
In stock
When installing on a Manolène (plastic) fuel tank, you may need to trim the tip of the cap's locking mechanism so that it does not touch the underside of the hood.
Cap thread: 2.75" x 16 TPI
Cap width: 86.5 mm
Cap...
Out of stock
Segment Characteristics:
Segment Diameter: Ø 75.70mm
Thickness of Upper Segments (Fire-resistant): 1.00mm
Thickness of Intermediate Segments (Waterproof): 1.20mm
Low ring thickness (Scraper): 2.5mm
It is essential...
In stock
Out of stock
Out of stock
Out of stock
Diameter on the rack side: M12x100 (Right hand thread)
Diameter on the steering ball side: M14x150 (Right hand thread)
In stock
In stock
This sprung clutch disc, featuring riveted sintered metal pads and reinforced springs, is a direct replacement for the original unit and requires no flywheel modification.
Essential for transferring engine power to...
In stock
