Aluminum steering cardan nut - Ø8mm of the 2 screws and 20mm center distance

Suitable for:

• • R8 / A110: Front Big Brakes
  • R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
  • A310.4: Front Brakes
  • A310 V6 (Pre-1980): Front Brakes
  • R12 (All models): Front Brakes
  • R15 / R16 / R17 (All models): Front Brakes

Brake pads with a retaining stop (B in the diagram) must be fitted with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on the track. public.

• Sold individually
• Shim height indicated in the photo
• The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
• AVP Accuracy: The two shims can be different on the right and left sides of the same rack.

• Sold individually
• Shim height indicated  in the photo
• The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
• AVP Accuracy: The two shims can be different on the right and left sides of the same rack.

• Suspension ball joints: M12x125 axle - Cone Ø 15mm to Ø 17.5mm
• Mounting center distance on the wishbone: 46mm and 54mm

• Useful length (L on photo diagram number 3): 12.5mm
• Sold with the pin
• OE Renault / Alpine Ref: 0705339100

• Pressure : 0 - 6 bar
• Release pressure : 0.60 bar
• Thread: M14x150
• If fitting the pressure transmitter to a 1397cc R5 Alpine (R1223) engine, use extension part number: AVP5091