- Complete wishbone with ball joint and silentbloc (x2)
- Wishbone equipped with suspension ball joints (AVP 5309): M10x125 axle - Cone Ø 11.50mm to Ø 13mm
- Suitable for R4 / 4L: From 1969 to end of series
In stock
Upper Left Suspension Wishbone (Complete) - Version with reinforcement (From 1969 to the end) - Ref 0832139900
Reference:
4L-312
- Complete wishbone with ball joint and silentbloc (x2)
- Wishbone equipped with suspension ball joints (AVP 5309): M10x125 axle - Cone Ø 11.50mm to Ø 13mm
- Suitable for R4 / 4L: From 1969 to end of series
€42.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
- Rotules de suspension: Axe M10x125 - Cône Ø 11.50mm à Ø 13mm
- Entraxe de fixation sur le triangle : 42mm et 47.5mm
Réf OE Renault : 7701451904
Out of stock
- Suspension ball joints: M12x125 axle - Cone Ø 12.50mm to Ø 14mm
- Mounting center distance on the wishbone: 42mm and 51mm
OE Renault Ref: 7701450637 / 7701461162
In stock
- Suspension ball joints: M12x125 axle - Cone Ø 12.50mm to Ø 14mm
- Mounting center distance on the wishbone: 42mm and 51mm
Renault OE Ref: 7701450635 / 7701461161
In stock
Customers who bought this product also bought:
Suitable for the following vehicles:
- R4 / 4L: Type R1120: from chassis number 954001: from 10/1968
- R4 / 4L: Type R1123: from chassis number 627132: from 07/1968
- R4 / 4L: Type R1126: from 1971
- R4 / 4L Safari: from 1971
- R4 / 4L GTL: Type R1128: from 1978
- R4 Rodeo: from 1970
- R4 Van: Type R2105: from chassis number 59996: from 10/1968
- R4 Van: Type R2106: from chassis number 25950: from 10/1968
- R4 Van: Type R2108 - R2109 - R2391 - R2392: from 1970
- R4 Van: Type R2340 - R2370 - R2430: from 1975
- R5 All models (except Alpine and Alpine Turbo): from 1972 -> 1985
- R5 RODEO: from 1982 -> 1985
- R6 RODEO: from 1973
- R6: from 05/1968
- R7: All models
In stock
 - Version with reinforcement (From 1969 to the end) - Ref 0832139900&media=https://www.arnaudventouxpieces.com/11598-large_default/upper-left-front-triangle-ref-832139900.jpg){kind=link}
In stock
Limited special offer
In stock
In stock
- HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since 1950.
- The excellent viscosity balance of HTX COLLECTION 20W-50 ensures low-wear starts, even after long periods of inactivity, and also protects against wear in hot weather.
.jpg){kind=logo}
In stock
- Pouche delivered with primary shaft oil seal Ø 17x28x7mm
Suitable for:
- R4 / 4L : Gearbox (4 speeds)354 / HA0 / HA0-...
- R5 : Gearbox (4 speeds)354 / HA0 / HA0-....
In stock
Suitable for:
-
- Estafette: Cléon 1108cc engine
- R4 F6/GTL (Engine 688, C1E): Cléon 1108cc engine
- R5 TL/GTL and Commercial Vehicles: Cléon 1108cc engine
- R6 TL: Cléon 1108cc engine
- R8 Major (R1132) / R8S (R1136): Cléon 1108cc engine
- R10: Cléon engine 1108 cm³
The sets are supplied with the following components:
- Liners (x4)
- Pistons (x4)
- Rings (x12)
- Pin pins (x4)
Dimensions of the various parts:
- Liner bore diameter: Ø 70 mm
- Flange or top diameter (D): Ø 85.80 mm
- Liner base diameter (A):Ø 75.44mm
- Overall height including skirts of cylinder liners (C): 135mm
- Height from top of cylinder liner to base seal area (E): 94.85mm
- Panel dimensions: Ø 18x62mm (Cirlip-free mounting)
- Ring thickness: 2mm / 2mm / 3.5mm (Fireproof/Sealing/Scraper)
- Base seal type: Paper gasket
Piston mounting direction: one arrow drawn perpendicular to the axis of the piston, figure on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).
It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals.
In stock