2mm longer camshaft rods for re-cut camshafts.
Length:
Intake: 168mm
Exhaust: 191mm
In stock
Best sellers
A kit (AVP7609) is required to modify the rack on both sides.
In stock
In stock
In stock
Sold individually
Out of stock
Out of stock
Single-pin base / aligned pins
Dimensions: 8 x 20 mm
Due to the multitude of bulb types used, please check compatibility with your vehicle.
In stock
Suitable for GOTTI rims with Ø 6mm bolts (except GOTTI rim No. 7)
Zinc-plated steel washer to be positioned on the nut side
In stock
This kit is composed of:
AVP 5214 Ø 25 to 40mm x4
AVP 5217 Ø 8 to 16mm x12
AVP 5223 Ø 12 to 20mm x7
AVP 5215 Ø 16 to 27mm x3
AVP 5209 Ø 40 to 60mm x2
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4 (All models)
A310 V6 (From number 1 to number 47709)
In stock
Lower fixing eye width 21mm
Lower fixing screw Ø 9mm
In stock
In stock
In stock
In stock
In stock
In stock
Sold individually
Out of stock
The installation of the rear tie rods reduces the movement of the rear axle, providing the vehicle with improved road holding on the rear axle.
The tie rods can be installed on a 4CV with the battery in the front...
In stock
For filler neck with 1/4 turn locking pin on the outside.
Out of stock
Black base
Sold without festoon bulb: Reference AVP1820
In stock
Pinion 11 teeth
Tooth height 9mm
Suitable for 688, 689, 810, 840, C1C and C1E motor
In stock
In stock
In stock
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Journal Diameter (A): Ø 51.77mm
Housing Diameter (B): Ø 55.88mm
Bearing Width (C): 18.68mm
Bearing Width (C): 24.68mm
Bearing Thickness (D): 2.02mm
Smooth,...
In stock
In stock
Overall length: 129.5 cm
Sheath length: 98.5 cm
Cable length: 112 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
Out of stock
Box Type 330 (2nd model) and Type 353 (1st model)
In stock
Different carburetor needles used:
Solex 32 PIBT: 1.5 (Included in the pouch)
Solex 32 PICBT: 1.7 (Not included in the pouch)
Suitable for:
Dauphine Gordini and Ondine Gordini: R1091
Floride and Caravelle: R1092
In stock
- Dimensions: 60mmx190mm
- Round stem 40° inclination
- To be mounted with adhesive base reference 5924
In stock
Delivery in France only
Spray paint for easy application to radiator fins
Resists all commercial coolants, oil, and fuels (after one week of drying)
In stock
For the Alpine A108: Consult us before placing the order because several assemblies are possible
In stock
In stock
Stem Length:
Intake: 166mm
Exhaust: 189mm
In stock
Overall length: 179cm
Sheath length: 47.5cm (x2)
Cable length: 176cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
In stock
In stock
Out of stock
Tie rod adjustment range: 9.5cm to 11.5cm
The tie rod can be cut to size to make it shorter
In stock
In stock
In stock
Compatible with :
R8G R1134 (1108cc engine - Type 804) / R1135 (1255cc and 1296cc engine - Type812)
Alpine A110 1100G and 1300G/S
In stock
In stock
Suitable for the following vehicles:
R4: Billancourt engine 747cm³ / 782cm³ (Type 680-02) / 845cm³ (Type B1B and 800-...)
R5 (R1221 , R1391 , R1220): Billancourt engine 845cm³ (Type 800-10)
Renault OE Ref: 8557892 /...
In stock
In stock
In stock
In stock
In stock
Inner diameter of the spacer 12mm
Inner diameter of the rubber 12mm
In stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Manifold supplied with O-rings (x2) and studs (x4) for mounting the carburetor
The carburetor is mounted directly onto the manifold. The seal is...
In stock
In stock
Bleeder Screw Diameter: Tapered Thread - 1/8" NPTF (+/- 10.29mm)
Original OE Ref: 6072180 / 0607218000 / 6072471 / 0607247100 / 7703075009
In stock
Headlight Bulb
3-pin base / European code
Dimensions: 40X82mm
Part Number: 0854153900 / 7701348006
Due to the wide variety of bulb types used, please check compatibility with your vehicle.
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
Out of stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock