Front or Rear Hub Bearing (SNR Brand) Ø 39x108x17mm - A310 V6 (After 1980 from no. 47709 to end of series) / R5 Turbo

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.

• Automatic spring-loaded tensioner
• Features a grease fitting to ensure lubrication and maintain tension of the chain guide against the chain
• Renault OE Ref: 084627500 / 7700578993 / 7700719076 / 7701349603

Rubber seal made from materials with mechanical properties specific to this application.

Suitable for:

• R5 Alpine (R1223) and Alpine Turbo (R122B)
• R5 Turbo (R8220)

Ø bowl side gearbox 81mm / Ø shaft 25mm

This kit consists of the following copper pipes:

• From the brake master cylinder to the front right wheel
• From the brake master cylinder to the front brake proportioning valve (3/8"-24UNF fitting)
• From the brake master cylinder to the front brake proportioning valve (M10x100 fitting)
• From the front proportioning valve to the rear three-way fitting
• From the rear three-way fitting to the rear right wheel
• From the rear three-way fitting to the rear left wheel

• • Overall length: 57.5 cm
  • Sheath length: 22.5 cm
  • Cable length: 45 cm

Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.