Engine oil pressure warning sensor (0.7 bar) - M18x150

• This ignition harness consists of 6 spark plug wires and 1 coil wire.
• We would like to point out that our spark plug harnesses are made with 7mm diameter, black silicone wires with a standard copper core, which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as radios, tripmasters, monitors, or certain electronic ignition kits, some interference or disruption may be observed.

Delivery in France only

• Recommended paint for decorating and protecting the exhaust manifold
• Resistant up to 600°C

Segment Characteristics:

• • Segment Diameter:Ø 88mm
  • Thickness of Upper Segments (Fire-resistant): 1.5mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.