This kit is composed of:
AVP 5214 Ø 25 to 40mm x4
AVP 5217 Ø 8 to 16mm x12
AVP 5223 Ø 12 to 20mm x7
AVP 5215 Ø 16 to 27mm x3
AVP 5209 Ø 40 to 60mm x2
In stock
Best sellers
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4 (All models)
A310 V6 (From number 1 to number 47709)
In stock
In stock
In stock
Mounts on the conical exhaust manifold (female cone)
Cone dimensions:inner diameter 39mm and outer flange diameter Ø 56mm
Dual chrome exhaust outlet, inner diameter 54mm
The muffler mounts in place of the original...
In stock
Pour étrier de marque : Lucas ou Girling
Joint de jointure d'étrier Ø 8.5x12mm
In stock
Double chain 50 links
Sprocket 36 teeth and 18 teeth
Out of stock
In stock
Kit contents:
Gearbox mounting studs (x4): M10x50mm
Crossmember mounting bolts (x8): M8x40mm
Aluminum spacers for gearbox bracket (x2): Thickness 12mm / Hole spacing 65mm
Aluminum spacers for crossmember (x4):...
In stock
Out of stock
The sets are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 59.95mm
Cylinder...
In stock
Clutch cable with chassis mounting
Overall length:207cm
Sheath length: 148cm
Cable length: 196,5cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from...
In stock
Black base
Sold without festoon bulb: Reference AVP1820
In stock
In stock
Delivery in France only
Complete treatment designed to restore the interior of your fuel tank.
For tanks with a capacity of 25 to 40 liters.
In stock
In stock
In stock
Overall length: 222 cm
Sheath 1 length: 66 cm
Sheath 2 length: 61,5 cm
Cable length: 2010,5 cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OE) cables from car...
In stock
In stock
Suitable for:
A310.6: Front and rear disc - After 1980 (n°47709 at the end of the series)
R5 Turbo: Front and rear disc
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310 V6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
Brake pads with a retaining stop (B in the diagram) must...
In stock
In stock
The kits are supplied with the following components:
Cylinder Heads (x4)
Domed Pistons (x4)
Rings (x12)
Pin (x4)
Circle Clips (x8)
Dimensions of the various parts:
Cylinder Head Bore Diameter: Ø 75.7mm
Cylinder...
In stock
Segment Characteristics:
Segment Diameter:Ø 55.8mm
Thickness of Upper Segments (Fire-resistant): 2mm
Thickness of Intermediate Segments 1 (Waterproof): 2mm
Thickness of intermediate rings2 (Sealing): 2mm
Thickness...
In stock
In stock
Filter Dimensions:
Inner Diameter (D2): Ø148mm
Outer Diameter (D1): Ø 201mm
Height (H1): 60mm
Height (H2): 53mm
The dimensions given are for guidance only; slight variations of a few millimeters are possible...
In stock
R4 / 4L: Box354 / HA0-119 / HA0-164 / HA0-166
R5: BoxHA1
In stock
Out of stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.20)
Crankpin Diameter (A): Ø 40.76mm
Housing Diameter (B): Ø 44.00mm
Bearing Width (C): 19.24mm
Bearing Thickness (D): 1.61mm
Smooth, lug-type bearings with no...
In stock
Overall length: 226cm
Sheath length: 64.5 cm x 2
Cable length: 223cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
In stock
Gaitor to be mounted on the steering rack equipped with original steering rods ("fork" rod)
In stock
In stock
Overall length: 196cm
Sheath length: 136,5cm
Cable length: 187cm
Suitable for cars with handbrake under the dashboard:
A110.1100 VA and VB
A110.1300 VA and VB (From No. 1 to 11951)
A110.1300 VC (From No. 1 to...
In stock
In stock
In stock
Flat head screw (Non-conical/non-countersunk screw)
Sold individually (4 screws required per carburetor)
Part number 85 on the exploded view
See below for compatibility with other WEBER carburetors
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
11-tooth pinion
Teeth height: 9.3mm
Overall pinion height: 63.50mm
Suitable for 688, 689, 810, 840, C1C and C1E engines
In stock
In stock
Overall Length: 179cm
Sheath Length: 50cm x2
Cable Length: 176cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OE) cables from car manufacturers.
In stock
Segment Characteristics:
Segment Diameter: Ø 76.7mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 4mm
It is essential to...
In stock
Pulley specifications:
Suitable for a 10mm wide belt
Pulley outer diameter: Ø 140mm
Crankshaft bore diameter: Ø 24mm
Keyway width and length: Width 5mm / Length: 34mm
Oil seal contact surface diameter: Ø 35mm
Oil...
Out of stock
Valve stem bore diameter: Ø 7.70 mm
Seal inner diameter (grips the guide): Ø 10.90 mm
Seal outer diameter: Ø 13.20 mm
Seal metal part height: Ø 6.50 mm
Overall height: 10 mm
Sold in kits of 12 pieces
Renault / Alpine...
In stock
In stock
In stock
Out of stock
This headlight is designed to accept a European code bulb with a round base (P45T)
Inner diameter of the dish for fitting the lens: Ø 150mm
In stock
Mounting center distance: 67mm
Mounting hole diameter: Ø 11mm
Crimping diameter: Ø 42mm
OE Renault reference: 6000057158 / 6001001594
Two gaskets required - Sold individually
In stock
Fuel filter with metal cartridge, ideal for replacing plastic filters, because it's more durable.
Inlet and outlet diameter: Ø 8mm
Cartridge body diameter: Ø 55mm
Filter cartridge length: 78mm
In stock
In stock
For the Alpine A108: Consult us before placing the order because several assemblies are possible.
In stock
In stock