Seal Diameter: Ø 24x51 mm
Seal Thickness: 3 mm
Material: Specific hydrocarbon rubber
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top and Gold-Flo
Seal must be replaced each time the pump...
In stock
Alpine A110 Engine and Transmission Performance (Page 2 sur 2)
This silent block kit is used for mounting Facet pumps and allows the pump to be fixed to the body, preventing vibrations.
Suitable for Facet fuel pumps of the following types: Silver Top / Red Top and Gold-Flo
Kit...
In stock
Glass bowl Ø 67mm
Filter element: Interchangeable paper cartridge
One inlet: dual size 6 and 8mm
One outlet: dual size 6 and 8mm
Regulation pressure: Regulation range from 0 to 0.6 bar
Compatible with fuel SP95 /...
In stock
Glass jar Ø 67mm
Filter element: Replaceable paper cartridge
One Inlet: dual size 6 and 8mm
One Outlet: dual size 6 and 8mm
Regulating pressure: Regulating range from 0 to 0.6 bar
Compatible with SP95 / SP98 / E85...
In stock
Gauge Diameter: Ø 40mm
Stainless Steel Body
Measuring Range: 0-1 bar (Caution: Dual bar/psi scale)
Connection: 1/8″ NPT
This fuel gauge is intended for pressure adjustment only and is not for permanent...
In stock
In stock
In stock
Inner diameter: Ø 18mm
Outer diameter: Ø 42mm
Height: 42mm
In stock
In stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Manifold supplied with O-rings (x2) and studs (x4) for mounting the carburetor
The carburetor is mounted directly onto the manifold. The seal is...
In stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Intake manifold height: 76mm
Manifold supplied with O-rings (x4) and carburetor mounting studs (x8)
The carburetor mounts directly onto the...
In stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Flanges with tapping for a vacuum
Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)
Out of stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Ideal assembly with a pair of aluminium flanges Ref: AVP6810
Out of stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 40mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock
In stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 45mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock
In stock
In stock
Stainless steel airbox: high corrosion resistance and durability
In stock
65mm Clip for Stainless Steel Air Box
Material: Stainless Steel
Sold individually
Suitable for:
Weber 45 DCOE Carburetor
Weber 45 DCOM Carburetor
In stock
In stock
In stock
Out of stock
Out of stock
In stock
In stock
"4 in 1" manifold for transverse outlet (Inlet Ø 32mm / Outlet Ø 45mm) - For R5 Alpine cylinder head
Exhaust duct inlet diameter (inner): Ø 32mm
Exhaust duct outlet diameter (outer): Ø 45mm
In stock
Out of stock
Out of stock
In stock
In stock
Overall length: 55 cm
Out of stock
In stock
Length (Overall): 74cm
In stock
Mounts on the conical exhaust manifold (female cone)
Cone dimensions:inner diameter 39mm and outer flange diameter Ø 56mm
Dual chrome exhaust outlet, inner diameter 54mm
The muffler mounts in place of the original...
In stock
In stock
Out of stock
This lighter is suitable for:
- R8G / A110 (1108cc / 1255cc / 1296cc)
Kit to be used with a primary resistance coil between 2.5 and 3.5 ohms
Compatible with AVP4708 and AVP4715 coils
Out of stock
Suitable for (Engine Type 688 / 689 / 810):
R4 / R6 / R8
Caravelle - Matra Jet
R12.TL - R12.TS - R15.TL
A110.V85 (810) - A110.GT4
This distributor must be used with a coil with a primary resistance between 2.5...
Out of stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
In stock
Built-in short extensions
Straight coil terminal
Coil wire length: 50cm
This ignition harness consists of 4 spark plug wires and 1 coil wire.
We would like to point out that our spark plug wires are made with 7 mm...
In stock
Built-in short extensions
Straight coil terminal
Coil wire length: 50cm
We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), which means...
In stock
Built-in short extensions
Straight coil terminal
Coil wire length: 50cm
This ignition harness consists of 4 spark plug wires and one coil wire.
We would like to point out that our spark plug harnesses are...
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires are...
Out of stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires are...
Out of stock
Blue silicone ignition harness with 90° angled terminals (long extensions integrated into the wires)
This ignition harness consists of 4 spark plug wires and one coil wire.
Terminals on coil 90° angled
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like...
Out of stock
4 spark plug wires + 1 coil wire
Straight terminals on coil
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like to point out that our spark plug wires...
Out of stock
This ignition harness consists of 4 spark plug wires and one coil wire.
Terminals on coil straight
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like...
Out of stock
In stock
These iridium-electrode spark plugs are suitable for both daily road use and rallying. They are designed to improve engine reliability and performance, whether hot or cold.
Suitable for:
A110.1600 (S / SC / SI)
R12G...
In stock
Cooling fan: Pusher or Puller
Universal Spal connector (requires modification depending on specific vehicle wiring)
Observe correct wiring polarity for fan rotation:
Fan in puller mode: Red (+ Battery) / Black (- /...
In stock
Sold with water pump gasket
Distance between two pulley mounting bolts (Center-to-center):50mm
Pulley mounting using x4 M8 bolts (Not supplied)
The high-flow water pump increases performance Cooling without any...
In stock
Out of stock
In stock
Assembly Group 4
In stock
In stock
Exhaust heat wrap reduces heat radiation from manifolds, silencers, or full exhaust systems when wrapped directly around the pipes. It effectively protects the engine bay and heat-sensitive components (starter motor,...
In stock
Exhaust heat wrap reduces heat radiation from manifolds, silencers, or full exhaust systems when wrapped directly around the pipes. It effectively protects the engine bay and heat-sensitive components (starter motor,...
In stock
HTX CHRONO 10W-60 is a synthetic motor oil suitable for classic racing cars, both older and newer.
Lubricant for powerful, modified and reconditioned engines, boosted by a turbocharger or supercharger.
10W-60 allows...
Out of stock