×

Blue Silicone Ignition Harness with Straight Terminals (Long Extensions Built into the Wires)

Reference:
6743
  • This ignition harness consists of 4 spark plug wires and one coil wire.
  • Terminals on coil straight
  • Length of coil cable: 61cm
  • Length of 2 spark plug cables: 26.5cm
  • Length of 2 spark plug cables: 36.5cm
  • We would like to point out that our spark plug harnesses are manufactured with 7mm diameter silicone wires, in black or red, with a standard copper core, which means they do not have interference protection.
  • If the car is equipped with sensitive electronic accessories, such as radios, trip masters, monitors, or certain ignition kits electronic equipment, some interference or disruption may be observed.
Read moreShow less
€86.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
6743
You may also like
  • 4 spark plug wires + 1 coil wire
  • 90° angled coil terminals
  • Length of coil cable: 61cm
  • Length of 2 spark plug wires: 26.5cm
  • Length of 2 spark plug wires: 36.5cm
  • We would like to point out that our spark plug wires are made with 7mm diameter red silicone wires and a standard copper core (wire material), which means they do not have interference protection.
  • If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
Reference: 6740
€86.00 (tax incl.)
Add to cart
In stock
  • 4 spark plug wires + 1 coil wire
  • 90° angled coil terminals
  • Length of coil cable: 61cm
  • Length of 2 spark plug wires: 26.5cm
  • Length of 2 spark plug wires: 36.5cm
  • We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), which means they are not protected against interference.
  • If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
Reference: 6739
€86.00 (tax incl.)
Add to cart
In stock
  • 4 spark plug wires + 1 coil wire
  • Straight terminals on coil
  • Length of coil cable: 61cm
  • Length of 2 spark plug cables: 26.5cm
  • Length of 2 spark plug cables: 36.5cm
  • We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), they do not have interference protection.
  • If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.
Reference: 5703
€86.00 (tax incl.)
Add to cart
In stock
  • 4 spark plug wires + 1 coil wire
  • Terminals on coil straight
  • Length of coil cable: 61cm
  • Length of 2 spark plug cables: 26.5cm
  • Length of 2 spark plug cables: 36.5cm
  • We would like to point out that our spark plug wires are made with 7mm diameter, black silicone wires with a standard copper core (wire material), which means they do not have interference protection.
  • If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur. happen.
Reference: 6709
€86.00 (tax incl.)
Add to cart
In stock
Customers who bought this product also bought:

Dimensions of the Large Spring:

  • Outer Diameter: Ø 35.90mm
  • Inner Diameter: Ø 27.80mm
  • Wire Diameter: Ø 4.1mm
  • Free Height (overall): 49.50mm

Dimensions of the Small Spring:

  • Outer Diameter: Ø 25.90mm
  • Inner Diameter: Ø 20mm
  • Wire Diameter: Ø 2.90mm
  • Overall height: 42mm

Dimensions provided for information purposes only, may vary slightly.

Reference: 60143
€128.00 (tax incl.)
Add to cart
In stock

The sets are supplied with the following components:

  • Cylinder Heads (x4)
  • Domed Pistons (x4)
  • Rings (x12)
  • Pin (x4)
  • Circle Clips (x8)

Dimensions of the various parts:

    • Cylinder Head Bore Diameter: Ø 78mm
    • Cylinder Head Flange or Top Diameter (D): Ø 96mm
    • Cylinder Head Base Diameter (A): Ø 82.50mm
    • Overall height including skirts of cylinder liners (C): 143.5mm
    • Height from top of cylinder liner to base seal area (E): 92.50mm
    • Panel dimensions: Ø 22x66.25mm (Cirlip-free mounting)
    • Ring thickness: 1.75mm / 2mm / 4mm (Fireproof/Sealing/Scraper)
    • Base seal type: Paper gasket

Piston mounting direction : an arrow drawn perpendicular to the axis of the piston appears on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals. 

Reference: 6078
€426.00 (tax incl.)
Add to cart
In stock
1