Red Silicone Ignition Harness with 90° Elbow Terminals (Long Extensions Integrated into the Wires)
Reference:
6740
- 4 spark plug wires + 1 coil wire
- 90° angled coil terminals
- Length of coil cable: 61cm
- Length of 2 spark plug wires: 26.5cm
- Length of 2 spark plug wires: 36.5cm
- We would like to point out that our spark plug wires are made with 7mm diameter red silicone wires and a standard copper core (wire material), which means they do not have interference protection.
- If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
€86.00
(tax incl.)
Customers who bought this product also bought:
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
- For fitting a belt width: 13mm
In stock
&media=https://www.arnaudventouxpieces.com/5142-large_default/spark-plug-wire-harness-red.jpg){kind=link}
Suitable for valves with a groove in the upper position (type KK) and for stem diameter 8mm
In stock
In stock
- This kit contains an M9 adjustment screw nut and an M8 nut
- To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
- A square symbol indicates a square seal, while a circle symbol indicates a round seal.
- It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
- We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
- It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.
In stock
This igniter is suitable for:
- R5 Alpine (R1223)
Igniter to be used with a coil with a primary resistance of 2.5 to 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Instructions included
In stock
In stock