Exhaust Manifold Gasket (1600cm³ Engine) - R12G / A110 / A310.4 - Ref 6000001454

• Delivery in France only
• Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
• Resistant to 180°C
• Capacity: 500ml
• Color: RAL 9005 BLACK
• Applicable directly with a brush or spray gun by diluting the paint with thinner reference C024.

Segment Characteristics:

• • Segment Diameter:Ø 79mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

• Fitting for flat wiper arm width 6mm

• Length under head: 37mm
• Significantly higher strength than the original, ideal for tuned engines

• Windshield with separate power supply for left and right side heating.

Shipping available. Contact us to obtain a transport quote and find out our conditions.

Flexor Specifications:

• • Mounting hole spacing:4 x 50.50 mm
  • Mounting hole diameter: Ø 8.4 mm
  • Center hole diameter:Ø 10.50 mm
  • Flexor thickness: 11 mm
  • Material:Rubber flexor with metal reinforcement
  • Supplied with 4 x M8 x 20 mm screws and 4 x nylock nuts

For some assemblies with a center screw, replacing this screw with a socket head cap screw (SHCS) or modifying the flexor may be necessary.