4CV engine (Page 2 sur 2)
For mounting a belt width: 13mm
Groove for a 5mm key
A steel collar is installed on the oil seal surface for improved sealing and reduced pulley wear.
In stock
For mounting a belt width: 13mm
Groove for a 5mm key
A steel collar is installed on the oil seal surface for improved sealing and reduced pulley wear.
In stock
Suitable for:
4CV (1st and 2nd models)
Dauphine (1st model)
Alpine A106
Water pump with 7 mounting holes, you have the possibility to make the 8th hole if necessary.
In stock
Out of stock
Out of stock
In stock
Suitable for (Engine type 662 / 668 / 670 / 670-3):
4CV / Dauphine
Estafette / Juvaquatre
Identical to Ducellier: 566 / 4054 / 4037
Replaces SEV Marchal distributor K4 A46, RB U4VA (SEV Junior)
Curve designed for...
Out of stock
This lighter is suitable for:
- 4CV / Dauphine / Estafette / Juva 4 / R4 (1st model)
- Engine 622 / 668 / 670 / 670-3
Same as Ducellier: 566 / 3910 / 2175 / 4037 / 4065 / 4076 / 4094
Kit to be used with a primary...
Out of stock
Provide a shaft extension on the igniter drive pinion side, possibility of making it with the old pump shaft (provide about 28mm)
In stock
Threaded spigot diameter: M16x150
This assembly can be made from engine No. 958967 (early April 1960) on Ventoux Type 670 engines.
Out of stock
In stock
In stock
Possible mounting on the 4CV / Dauphine and Dauphine Gordini cylinder head (aligned or offset mounting holes)
Intake manifold inner diameter: Ø 29mm
Exhaust manifold inner diameter: Ø 29mm
Outlet inner diameter: Ø...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Please note, several versions have been put on sale, it is important to check the compatibility with your vehicle.
Ref OE Renault: 8212132 / 8213280 / 8213902 / 8213270 / 8214060
In stock
Please note, several versions have been put on sale, it is important to check compatibility with your vehicle.
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2.5mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 3mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
Limited special offer
In stock
The HTX PRESTIGE SAE 40 engine oil formula has been specially designed for the engines of vehicles manufactured between 1900 and 1960, for models without oil filters or with cyclone separators.
This engine oil is...
In stock
This oil is best for engines equipped with cork and paper gaskets and not equipped with an oil filter.
For summer use, it is preferable to use SAE 50 oil, which will be thicker than SAE 30 oil.
In stock
This oil is best for engines equipped with cork and paper gaskets and not equipped with an oil filter.
For summer use, it is preferable to use SAE 50 oil, which is thicker than SAE 30 oil.
In stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
Out of stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
In stock
HTX PRESTIGE 20W-50 is a mineral engine oil suitable
for both old and new classic cars.
Thanks to its high viscosity, HTX PRESTIGE 20W-50 guarantees a consistent oil film, even in hot weather, to provide the best...
Out of stock
In stock
In stock
Delivery in France only
Epoxy coating for the interior of the engine block.
0.5 kg of resin and hardener + 0.5 l of thinner
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9006 Aluminum Gray
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 6005 green
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Bright Blue RAL 5005
Applicable directly with a brush or spray gun by...
In stock
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox
Resistant to 180°C
Capacity: 500ml
Color: Orange RAL 2002
Applicable directly with a brush or spray gun by diluting the paint with thinner...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Reddish brown RAL 3011
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Fire Red RAL 3000
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
In stock