Crank guide bell

• The installation of the rear tie rods reduces the movement of the rear axle, providing the vehicle with improved road holding on the rear axle.
• The tie rods can be installed on a 4CV with the battery in the front trunk or the battery in the rear (after 1954). For the rear position, some modifications will be necessary.
• Installation instructions included.

Segment Characteristics:

• • Segment Diameter:Ø 58mm
  • Thickness of Upper Segments (Fire-resistant): 2mm
  • Thickness of Intermediate Segments (1) (Waterproof): 2mm
  • Thickness of intermediate rings2 (Sealing): 2mm
  • Thickness of lower rings (Scraper): 3.5mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the valuesgiven by the manufacturer or data in the supplied instructions.

During assembly, the piston ring gaps must be evenly distributed around the piston circumference at 120° intervals.