Suitable for gearboxes:
352 gearbox
365 gearboxes except models 365-05 / 365-06 / 365-10 (#1 to #297)
Original OE Ref: 7700502803 / 7700547433
In stock
Spare parts for A110 gearbox - Type 364
In stock
In stock
In stock
Suitable for the following gearboxes:
Box 330 (3rd)
Box 352-10 / 352-11 / 352-13 / 352-30 / 352-31 / 352-33 (3rd, 4th)
Box 353 (3rd, 4th, 5th)
Box 364-05 / 364-06 (3rd, 4th, 5th)
Box 365-10 / 365- 14 / 365-20 /...
In stock
Pin dimensions: Ø 5x25 mm
Sold individually
Renault OE Ref: 0854076500 / 7903067011
In stock
Pin dimensions: Ø 5x18mm
Sold individually
Renault OE reference: 084568700 / 7703067227A
In stock
Pin dimensions: Ø 5x20mm
Sold individually
Renault OE reference: 0853937500 / 7703067239A
In stock
Synchro Characteristics:
Outer cone with angle (A):6°40'
The outer friction faces or sectors (x15) are different: x3 small and x2 large
Synchro with a lug on the face opposite the main lugs of the synchro (See...
In stock
Synchro Features:
Outer cone with angle (A):9°
All outer friction faces or sectors (x15) are identical and equidistant.
Synchro with a lug on the face opposite the main synchro lugs (See diagram)
Renault OE Ref:...
In stock
Synchro Characteristics:
Outer cone with angle (A):6°40'
The outer friction faces or sectors (x15) are different: x3 small and x2 large
Synchro is smooth on the face opposite the synchro lug (See diagram)
Renault...
In stock
Synchro Characteristics:
Outer cone with angle (A):9°
All outer friction surfaces or sectors (x15) are identical and equidistant.
Synchro smooth on the face opposite the synchro lug (See diagram)
Renault OE Ref:...
Out of stock
In stock
In stock
Cap thread:Tapered thread - BSP 3/8x16 (+/- 16.66mm / 1.33 pitch)
Square head cap that can be tightened or loosened with a 10mm wrench.
Renault OE part number:0702980300 / 7703075012
In stock
In stock
In stock
For gearbox control shaft Ø 13mm
Suitable for gearboxes: 330-A4 / 353 / 364-05 / 364-06
OE Renault Ref: 98079333 / 0980793300 / 7701455390 / 7701501597
In stock
Pin dimensions:Ø 3x25 mm
Sold individually
Renault OE Ref: 0853950400 / 7703067210
In stock
Out of stock
Gearbox bell housing paper gasket - Gearbox 336 / 352 / 364 / 365 / 385 / 395 / NG5 - Ref 0428724300
Suitable for:
Box 336
Box 352
Box 364-05 / 364-06
Box 365-00 / 365-02 / 365-05
Box 365-10 / 365-14 / 365-20 / 365-24 / 365-28 / 365-29
Box 395
Box 385 / NG5
Out of stock
In stock
Brass scabbard that replaces the original plastic one.
In stock
In stock
OE Ref Renault: 7700551449 / 7703087023 / 7703087074 / 7703087117
In stock
Cap thread:Tapered thread - BSP 3/8x16 (+/- 16.66mm / 1.33 pitch)
Square head cap that can be tightened or loosened with a 17mm wrench.
Renault OE part number:0702980300 / 7703075012
Out of stock
OE Renault Ref: 7703090187 / 0857568100 / 7703090277
In stock
In stock
OE Renault Ref: 0852775600 / 0852957000 / 7703090181
In stock
Suitable for the following gearboxes:
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
In stock
Original chassis mounting with 4 screws (See photo of mounting center distance)
Suitable for gear knob with M12 thread
Gear lever height from chassis mounting: 27cm
Aluminum base with reinforced, maintenance-free...
Out of stock
Out of stock
In stock
In stock
In stock
AVP recommends the reinforced gearbox side silentblocks Ref 4305, for reasons of reliability and ease of assembly.
Out of stock
In stock
These bushings replace the original bushings; no modifications are required.
In stock
In stock
In stock
In stock
In stock
Rear aluminum skid plate for protection under the engine and gearbox (Sold individually) - A110 1600
Aluminum protection plate thickness: 5 mm
In stock
Kit Contents:
Front mounting bracket and silent block under gearbox: x1
Intermediate mounting bracket and silent block on trumpet stud x2
Rear mounting bracket on engine crossmember: x1
This kit can be fitted to...
In stock
Metric tap (ISO 6H tolerance): M10x150 (Right-hand thread)
Tap length (Overall): 80 mm
Mounting recess: 8 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Limited special offer
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9006 Aluminum Gray
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 6005 green
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Bright Blue RAL 5005
Applicable directly with a brush or spray gun by...
In stock
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox
Resistant to 180°C
Capacity: 500ml
Color: Orange RAL 2002
Applicable directly with a brush or spray gun by diluting the paint with thinner...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Reddish brown RAL 3011
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Fire Red RAL 3000
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
In stock