Aluminum protective ski under engine and gearbox with supports and silent blocks - A110.1600S

Suitable for:

• R8 / R8G / A110 : Front or rear disc (Big brake assembly)
• A110 1600 SX (VH) : Front or rear disc 
• R16 (L / TL / TS) / R16TX : Front disc
• A310.4 (No. 910 at the end of the series): Front disc
• A310 V6 - Before 1980 (No. 1 to No. 47708 ): Rear disc

Réf OE Renault : 0428906000 / 7700572631

• Center distance between carburetor and intake pipe : 110mm and 70mm
• Flanges with tapping for a vacuum
• Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.