The sets are supplied with the following components:
Liners (x4)
Pistons (x4)
Segments (x12)
Axles (x4)
Dimensions of the individual parts:
Liner bore diameter: Ø 79mm
Liner collar or top diameter (D): Ø 96mm...
In stock
R18 engine - 1647cc engine (Type 841 or 843- Bore Ø 79mm)
Our spare parts for the engine of your Renault 18
Discover here our wide selection of spare parts available to restore or maintain the 1647cc Engine (Type 841 or 843- Bore Ø 79mm) of your Renault 18.
Whether you are looking for: engine piston, cylinder liners, piston rings, crankshaft bearings, connecting rod bearings, shims, engine gasket set, base gasket, rocker cover, cylinder head gasket, sprocket, timing belt, chain Timing belt, intake valve, exhaust valve, manifold gasket, crankcase, chain tensioner... At AVP Arnaud Ventoux Pièces, we have everything you need to restore your classic R18 with quality components.
Segment Characteristics:
Segment Diameter:Ø 79mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 4mm
It is essential to...
In stock
For piston kit cylinder liners Ø 77mm (AVP6096), Ø 77.8mm (AVP60134) and Ø 79mm (AVP6085)
Set of 4 O-rings
Renault / Alpine OE Ref: 7701348226
In stock
Bearing Dimensions:
Dimension: Original (Standard) Dimension
Crankpin Diameter (A): Ø 48.00mm
Housing Diameter (B): Ø 51.60mm
Bearing Width (C): 21.75mm
Bearing Thickness (D): 1.77mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Crankpin Diameter (A): Ø 47.75mm
Housing Diameter (B): Ø 51.60mm
Bearing Width (C): 21.75mm
Bearing Thickness (D): 1.89mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.50)
Crankpin Diameter (A): Ø 47.50mm
Housing Diameter (B): Ø 51.60mm
Bearing Width (C): 21.75mm
Bearing Thickness (D): 2.02mm
Smooth, lug-type bearings with no...
In stock
Bearing Dimensions:
Dimension: Stock Dimension (Standard)
Journal Diameter (A): Ø 54.80mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 20.50mm
Bearing Thickness (D): 1.95mm
Smooth, lug-type bearings with grease...
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Junnel Diameter (A): Ø 54.55mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 20.50mm
Bearing Thickness (D): 2.07mm
Smooth, lug-type bearings with grease...
In stock
Bearing Dimensions:
Dimension: Repair dimension (+0.50)
Junnel Diameter (A): Ø 54.30mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 20.50mm
Bearing Thickness (D): 2.20mm
Smooth, lug-type bearings with grease...
In stock
In stock
Out of stock
In stock
Out of stock
Thickness : 1mm
Compatible with 1565cm³ to 1647cm³ engines (Type 807 844 and 843):
A110 1600S/SC/SX
A310 1600cc
R12G / R17G
R16.TS/TX
In stock
Engine gasket set with O-ring cylinder liner seals (for R18 engine block) – 1647cc engine (Type 843)
Suitable for engines: 843-18 / 843-19
Renault OE ref.: 7701457062
In stock
In stock
Inner Diameter: Ø 220mm
Outer Diameter: Ø 247mm
Thickness: 8mm
Number of Teeth: 117 Teeth
Réf OE Renault / Alpine : 7700520332 / 0555482400 / 5554824
Suitable for vehicles:
R4 / 4L: Type R1128 / R1129 - Engine...
In stock
Suitable for the following vehicles:
R5: See models in description
R9: See models in description
R11: See models in description
R15 / R16 / R17
R18: From 04/1978 to 02/1986
R19: See models in description
R20 (GTL / L...
In stock
In stock
Paper gasket thickness: 1.6 mm
Suitable for all 1565cc / 1596cc / 1605cc and 1647cc engines
In stock
In stock
Dimensions of the cups:
Inner Diameter:Ø 30.10mm
Outer Diameter:Ø 42mm
Height:4.7mm
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Automatic spring-loaded tensioner
Features a grease fitting to ensure lubrication and maintain tension of the chain guide against the chain
We prioritize quality and reliability: tensioner meets original equipment...
In stock
Compatible with 1565cm³ to 1647cm³ engines (Type 807 , 844 and 843):
A110 1600S/SC/SX
A310 1600cc
R12G / R17G
R16.TS/TX
In stock
Compatible with 1565cm³ to 1647cm³ engines (type 807, 844, 843):
A110 1800cm³
A310 1600cm³
R12G / R17G
R16.TS / TX
In stock
In stock
Cap Dimensions:
Cap Recess Diameter: Ø 32.5mm
Cap Outer Diameter: Ø 65.38mm
Metal Tab Length: 42mm
Metal Tab Width (at widest point): 13.40mm
Metal Tab Width (at narrowest point): 7mm
In stock
In stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
In stock
Pressure : 0 - 6 bar
Release pressure : 0.60 bar
Thread: M14x150
If fitting the pressure transmitter to a 1397cc R5 Alpine (R1223) engine, use extension part number: AVP5091
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 2.5mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 50cm x Width 33cm
Sheet Thickness: 3mm
Ideal for making oil pan gaskets, timing case gaskets, and cylinder head cover gaskets. These gaskets must be installed with a light clamping force....
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
Out of stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
Piston diameter: Ø 53 mm (Minimum) to Ø 125 mm (Maximum)
Tool height: 75 mm
Supplied with a square tightening wrench
Ideal tool for installing pistons in the cylinder block
Out of stock
Bore diameter: Ø 55mm (Minimum) to Ø 170mm (Maximum)
Stone dimensions: 100mm
Interchangeable honing stone
Self-adjusting and tightening sanding arm with flexible drive for pneumatic or electric drills
For honing,...
In stock
Set of 3 replacement honing stones for expandable reamer/shroud: reference AVP T020
Stone dimensions: 100mm
In stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
Out of stock
HTX COLLECTION 20W-50 is a customized solution for vintage and newer classic vehicles whose engines have been restored to their original condition, with or without turbochargers, particularly those manufactured since...
In stock