Fan trigger temperature 88°C
Fan stop temperature 79°C
In stock
Set of connecting rod bearings Ø 47.50mm - Repair dimension (+0.50) - 1600cm³ engine
Reference:
6046
Bearing Dimensions:
- Dimension: Repair Dimension (+0.50)
- Crankpin Diameter (A): Ø 47.50mm
- Housing Diameter (B): Ø 51.60mm
- Bearing Width (C): 21.75mm
- Bearing Thickness (D): 2.02mm
- Smooth, lug-type bearings with no grease holes or grooves
- Bearing Material :Bi-metal
€36.67
Order before 1pm and enjoy same day shipping !
Customers who bought this product also bought:
- 4 spark plug wires + 1 coil wire
- Terminals on coil straight
- Length of coil cable: 61cm
- Length of 2 spark plug cables: 26.5cm
- Length of 2 spark plug cables: 36.5cm
- We would like to point out that our spark plug wires are made with 7mm diameter, black silicone wires with a standard copper core (wire material), which means they do not have interference protection.
- If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur. happen.
In stock
Out of stock
Segment Characteristics:
-
- Segment Diameter:Ø 79mm
- Thickness of Upper Segments (Fire-resistant): 1.75mm
- Thickness of Intermediate Segments (Waterproof): 2mm
- Low ring thickness (Scraper): 4mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the instructions provided.or the values given in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
In stock
 - 1600cm³ engine&media=https://www.arnaudventouxpieces.com/1280-large_default/set-of-connecting-rod-bearings-o-4750mm-repair-dimension-050-1600cc.jpg){kind=link}