Crankshaft bearing set Ø 54.30mm - Repair dimension (+0.50) - 1600cm³ engine

11 tooth sprocket

Tooth height 11mm

Suitable for:

• R8 (All models) / Caravelle / Floride S
• A110 (All models) / Alpine GT4
• Matradjet

This adjustable steering kit replaces the original "Fork" type steering rods.

To install the adjustable rods, it is necessary to remove the silent block of the rack eye and replace the steering bellows with the specific bellows AVP4620 (Included in the kit).

Segment Characteristics:

• • Segment Diameter:Ø 79mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

Assembly only with graphite stopper

Suitable for:

• Box 336
• Box 352
• Box 364-05 / 364-06
• Box 365-00 / 365-02 / 365-05
• Box 365-10 / 365-14 / 365-20 / 365-24 / 365-28 / 365-29
• Box 395
• Box 385 / NG5