Florida Steering and Front Axle
Out of stock
Out of stock
In stock
The supplied ring allows the Ø 17x5x10mm bearing to be installed on the rack and pinion gears
In stock
Pair of pivots sold with:
x2 Pivot axles with silent blocks
x4 Bronze Rings
x2 Rubber Dust Covers
x2 Nylon washers
In stock
Ring Size:
Inner Diameter: Ø 21mm
Outer Diameter: Ø 24mm
Height: 30mm
Suitable for:
4CV (2nd Assembly): From 1956
Dauphine / Floride
Alpine A106 / A108
In stock
In stock
In stock
Out of stock
Front stabilizer bar connecting rod silent block Ø 21mm
Silent block of rods in rear spring (1st model)
Rear oil shock absorber arm silent block (1st model) - Ref 8511922
In stock
In stock
In stock
Suitable for:
4CV: After 1956
Dauphine
R8 / R8S / R8G
Caravelle / Florida S
A106 / A108
A110
Matradjet
In stock
In stock
Suitable for:
4CV: After 1956
Dauphine: Lower and Upper Wishbone Axle (Chassis Side)
R8 / R8S / R8G
Caravelle / Floride S
A106 / A108
A110
Matradjet
In stock
Screw M8x125
Total length under head: 45mm
Sold individually - Requires 4 screws per triangle
In stock
In stock
In stock
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Out of stock
In stock
Cap Dimensions:
Inner Diameter: Ø 40mm
Outer Diameter: Ø 42mm
Height: 26.5mm
Also suitable for some R16 (R1150) models with rear drum brakes.
In stock
Dowel Dimensions:
Dowel Thread: M12 ((125 Pitch / Class 10.9)
Dowel Head Diameter: Ø 19.50mm
Dowel Recess Diameter: Ø 14.30mm
Dowel Length Under Head: 33mm
Dowel Overall Length: 38mm
Suitable for:
Alpine A110 1300...
In stock
In stock
In stock
Stainless steel collar: Width 7mm
In stock
Stainless steel collar: Width 7mm
In stock
Stainless steel collar: Width 8mm
In stock
Stainless steel collar: Width 7mm
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Metric tap (ISO 6H tolerance): M12x10 (Fine pitch - Right-hand thread)
Tap length (Overall): 70 mm
Mounting drive: 7 mm square
Flat end tap, suitable for: Through holes and blind holes
Machine tap: Only one tap is...
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
In stock
In stock
In stock
In stock