Suitable for:
R8 (All models) / Caravelle / Floride S
A110 (All models) / Alpine GT4
Matradjet
This adjustable steering kit replaces the original "Fork" type steering rods.
To install the adjustable rods, it is...
In stock
Florida S Steering and Front Axle
Suitable for:
R8 (All models) / Caravelle / Floride S: Left and Right Side Boot
A110 (All models) / Alpine GT4: Left and Right Side Boot
A310.4: Left and Right Side Boot
A310 V6: Left Side Boot
Matradjet: Left and...
In stock
Out of stock
Flexor Specifications:
Mounting hole spacing:4 x 50.50 mm
Mounting hole diameter: Ø 8.4 mm
Center hole diameter:Ø 10.50 mm
Flexor thickness: 11 mm
Material:Rubber flexor with metal reinforcement
Supplied with 4 x...
In stock
Suitable for:
Eye end cap of rack and pinion - Ref 0824373600 / 7700504987
Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987
Exhaust hanger - A310 V6 - Ref 7700504987
Inner diameter of the eye: Ø...
In stock
In stock
Cone diameter: Top of cone Ø11mm / Bottom of cone Ø 12mm
Cone axis: M10x125
Ball joint / tie rod axis: M14x150 (Right hand thread)
In stock
In stock
The supplied ring allows the Ø 17x5x10mm bearing to be installed on the rack and pinion gears
In stock
In stock
Suitable for:
4CV: After 1956
Dauphine
R8 / R8S / R8G
Caravelle / Florida S
A106 / A108
A110
Matradjet
In stock
Suitable for:
4CV: After 1956
Dauphine: Lower and Upper Wishbone Axle (Chassis Side)
R8 / R8S / R8G
Caravelle / Floride S
A106 / A108
A110
Matradjet
In stock
In stock
This washer is positioned on the screw opposite the eccentric nut
Thick washer M8
Washer outer diameter: Ø 23mm
Sold individually; one washer is required per side.
In stock
Renault OE Ref: 1081200866
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
Not suitable for replacing the original ball joint bellows
In stock
In stock
In stock
In stock
Features:
Mounting eye width: 21mm
Lower mounting eye inner diameter: Ø 9mm
Shock absorbers sold in pairs
In stock
Dimensions:
- Length 145mm
- Interior Ø 46mm and Ø of the rod 10mm
In stock
Out of stock
In stock
Cap Dimensions:
Inner Diameter: Ø 40mm
Outer Diameter: Ø 42mm
Height: 26.5mm
Also suitable for some R16 (R1150) models with rear drum brakes.
In stock
Dowel Dimensions:
Dowel Thread: M12 ((125 Pitch / Class 10.9)
Dowel Head Diameter: Ø 19.50mm
Dowel Recess Diameter: Ø 14.30mm
Dowel Length Under Head: 33mm
Dowel Overall Length: 38mm
Suitable for:
Alpine A110 1300...
In stock
In stock
In stock
Stainless steel collar: Width 7mm
In stock
Stainless steel collar: Width 7mm
In stock
Stainless steel collar: Width 8mm
In stock
Stainless steel collar: Width 7mm
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Designed for touching up or repainting chassis or frames whose paint is simply faded, where a complete stripping or treatment is not desired, possibly without disassembly.
Specially formulated for brush...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Metric tap (ISO 6H tolerance): M12x10 (Fine pitch - Right-hand thread)
Tap length (Overall): 70 mm
Mounting drive: 7 mm square
Flat end tap, suitable for: Through holes and blind holes
Machine tap: Only one tap is...
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock