In stock
Clutch, Gearbox and Transmission Caravelle
Our spare parts for the clutch and gearbox of your Renault Caravelle
Discover here a wide choice of spare parts to restore or maintain the clutch and gearbox of your Renault Caravelle
Whether you are looking for a clutch disc, an ice mechanism, a graphite clutch release bearing, gearbox seals, bearings, synchro, housing, oil seal...At AVP Arnaud Ventoux Pièces, we have everything you need to restore your Renault Caravelle collection with quality components.
Assembly only with graphite stopper
Out of stock
Special Premium Quality graphite for clutch release bearings
Important: The release bearing clamping screw must be placed on the side opposite the fork
It is possible to keep the release bearing and replace only the...
In stock
Special Premium Quality graphite for clutch release bearings
It is recommended to soak the release bearing in warm engine oil and then wipe it dry before installation to avoid squealing noises
In stock
In stock
In stock
Sold with 3 fixing screws and the oil seal (Ø 17x30x7mm)
Guide to be mounted when replacing a clutch with a graphite thrust bearing with a modern diaphragm clutch
It is necessary to drill and tap in the clutch bell...
In stock
In stock
The fork is suitable for "original ball thrust bearing" type mounting or for conversion with a guided thrust bearing.
Mounting instructions provided.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
OE Ref Renault: 7700551449 / 7703087023 / 7703087074 / 7703087117
In stock
Brass scabbard that replaces the original plastic one.
In stock
In stock
Suitable for the following gearboxes:
Gearbox 330 / 353-03 / 353-13 / 353-33
Gearbox 352-30 / 352-31 / 352-33
Gearbox 364-05 / 364-06
Gearbox 365-10 / 365-14 / 365-20 /365-24 / 365-33
Gearbox 395-02 / 395-03
In stock
Suitable for the following gearboxes:
Gearbox 330 / 353-03 / 353-13 / 353-33
Gearbox 352-10 / 352-11 / 352-13
Gearbox 364-05 / 364-06
In stock
Suitable for the following gearboxes:
Gearbox 330 / 353-03 / 353-13 / 353-33
Gearbox 352-30 / 352-31 / 352-33
Gearbox 364-05 / 364-06
Gearbox 365-10 / 365-14 / 365-20 /365-24 / 365-33
Gearbox 395-02 / 395-03
In stock
Suitable for the following gearboxes:
Gearbox 330 / 353-03 / 353-13 / 353-33
Gearbox 352-10 / 352-11 / 352-13
Gearbox 364-05 / 364-06
Out of stock
In stock
Suitable for the following gearboxes:
Box 330 (3rd)
Box 352-10 / 352-11 / 352-13 / 352-30 / 352-31 / 352-33 (3rd, 4th)
Box 353 (3rd, 4th, 5th)
Box 364-05 / 364-06 (3rd, 4th, 5th)
Box 365-10 / 365- 14 / 365-20 /...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
Suitable for the following gearboxes:
- Box 353
- Box 364-05 / 364-06
- Box 365-00 / 365-02 / 365-10 / 365- 14 / 365-20 / 365-24 / 365-28 / 365-29 / 365-33
- Box 385
In stock
Out of stock
In stock
OE Renault Ref: 0852775600 / 0852957000 / 7703090181
In stock
In stock
In stock
Box Type 330 (2nd model) and Type 353 (1st model)
In stock
OE Renault Ref: 7703090187 / 0857568100 / 7703090277
In stock
Cap thread:Tapered thread - BSP 3/8x16 (+/- 16.66mm / 1.33 pitch)
Square head cap that can be tightened or loosened with a 10mm wrench.
Renault OE part number:0702980300 / 7703075012
In stock
For gearbox control shaft Ø 13mm
Suitable for gearboxes: 330-A4 / 353 / 364-05 / 364-06
OE Renault Ref: 98079333 / 0980793300 / 7701455390 / 7701501597
In stock
In stock
In stock
In stock
In stock
In stock
AVP recommends the reinforced gearbox side silentblocks Ref 4305, for reasons of reliability and ease of assembly.
In stock
These bushings replace the original bushings; no modifications are required.
In stock
Metric tap (ISO 6H tolerance): M10x150 (Right-hand thread)
Tap length (Overall): 80 mm
Mounting recess: 8 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
Out of stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock