Shaft seal for gearbox differential output 330 / 353 / 364 - Ø 36x62x7mm - Ref 0855181100

The kits are supplied with the following components:

• Cylinder Heads (x4)
• Domed Pistons (x4)
• Rings (x12)
• Pin (x4)
• Circle Clips (x8)

Dimensions of the various parts:

• • Cylinder Head Bore Diameter: Ø 75.7mm
  • Cylinder Head Flange or Top Diameter (D): Ø 89.75mm
  • Cylinder Head Base Diameter (A): Ø 80mm
  • Overall height including skirts of cylinder liners (C): 128mm
  • Height from top of cylinder liner to base seal area (E): 94.80mm
  • Shaft dimensions: Ø 20x63.5mm (Cirlip-free mounting)
  • Ring thickness: 1.75mm / 2mm / 4mm (Fireproof/Sealing/Scraper)
  • Base seal type: Paper gasket

Piston mounting direction: (arrow) drawn perpendicular to the axis of the piston, figure on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals. 

• Overall Length: 225cm
• Sheath Length: 82.5cm
• Rod Length: 113cm
• Cable Length: 111cm

Please note: for installation on a Renault Caravelle, we have noticed that some versions have a longer rigid rod. The rod will need to be extended by a few centimeters for installation.

Our cables are made in France and meet the assembly and quality standards of original equipment (OE) cables from car manufacturers.

Supplied with self-adhesive thermal protection to stick on the most suitable side depending on the assemblies.

• Screw: M11x150
• Length under head: 138mm
• Sold individually, 10 screws required per motor

A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.

• For fitting a belt width: 13mm

• TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
• Compatible with all brake fluids for assembling seals and Everything that comes into contact with brake fluid: master cylinder, wheel cylinder.

Suitable for gearboxes:

• Gearbox 314 / 318 / 325 / 328
• Gearbox 330 / 334 / 354
• Gearbox HA0-119 / HA0164 / HA0-166
• Renault OE Ref: 6068078 / 0606807800