Carburetor & Carburetor Parts CG (Page 3 sur 3)
In stock
F9 emulsion tube for WEBER 40DCOE and 45DCOE
Number 13 on exploded view
Also suitable for Weber carburetors: 32 DATR, 32 DRTA, 32 DMTRA, 48 DCOSP, 50 DCOSP, 55 DCOSP, 38 DCNL, 38 DCN, 40 DCNL, 40 DCOM, 45 DCO3, 45...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 13 on exploded view
Also suitable for Weber carburetors: 32 DATR, 32 DRTA, 32 DMTRA, 48 DCOSP, 50 DCOSP, 55 DCOSP, 38 DCNL, 38 DCN, 40 DCNL, 40 DCOM, 45 DCO3,...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Part number 65 on exploded view
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE
Sold individually, need 2 pieces for one carburetor
Number 64 on exploded view
Also suitable for the following carburetors: 32 DCOF, 38 DCOE, 40 DCO3, 40 DCOE, 42 DCOE, 45...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 63 on exploded view
Also suitable for the following carburettors: 38/40/42/45/48 DCOE, 48/50/55 DCO/SP, 45...
In stock
Choke filter for WEBER 40DCOE and 45DCOE carburetors
Requires 1 piece per carburetor
Part number 87 on exploded view
Also suitable for: 35 DCNL, 36 DCNF, 36 DCNFA, 38 DCNL, 40 DCNF, 40 DCNL, 38 DCOE, 40 DCOE, 42...
In stock
Suction and discharge valve for pump for WEBER 40DCOE and WEBER 45DCOE carburettor
Location at the bottom of the tank
Requires 1 piece per carburettor
Number 43 on exploded view
In stock
Paper gasket for inspection hatch for cover ref 48120 for WEBER 40DCOE and 45DCOE
Number 41 on exploded view
In stock
Inspection hatch for WEBER 40DCOE and 45DCOE
Number 80 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Sold individualy, requires 2 pieces per carburetor
Number 32 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE, 45DCOE and IDF carburetors
Sold individually, requires 2 pieces per carburetor
Number 31 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 78 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE AND 45DCOE carburetors
This fits on the side opposite the throttle control
Part number 86 on exploded view
Also suitable for: 30 IBA, 32 IBA, 36 DCNF, 36 DCNFA, 36 DCNV, 36 DCNVA, 38 DCOE,...
In stock
Suitable for old generation WEBER 45DCOE carburettor
WARNING: must be mounted with flat screw (Ref 48052)
Drilling for accelerator pump control to be done.
Overall length: 180mm
Number 85 on exploded view
Also...
In stock
Axle for carburetor WEBER 40DCOE old generation
ATTENTION mounts with flat screw (Ref 48052)
Drilling for recovery pump control to be done
Length overall : 180mm
Number 85 on exploded view
In stock
Suitable for new generation WEBER carburetors
Flat type screw (not tapered)
Sold infividually, requires 4 pieces for 1 carburetor
Number 35 on exploded view
Compatible with other WEBER carburetors, see below.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors old generation for the throttle screw,
Suitable for all types of WEBER 40 and 45 DCOE carburetors for the inspection hatch,
Sold individually,
Countersunk head and...
In stock
Throttle valve for WEBER 40DCOE carburettor
Angle of 78°
16mm between fixing holes
Number 33 on exploded view
In stock
Throttle valve for carburettor WEBER 45DCOE
Angle of 78°
16mm between fixing holes
Number 33 on exploded view
In stock
Shifting washer against throttle shaft bearing for carburettor WEBER 40DCOE AND WEBER 45DCOE
Thickness: 0.5mm
Inner Ø: 7mm
Outer Ø: 14mm
Number 77 on exploded view
In stock
Split pin for securing the pump control on the throttle valve shaft for WEBER 40DCOE and 45DCOE carburetors
Number 82 on exploded view
Compatible with WEBER carburetors: 32 DCOF, 35 DCNL, 36 IDF, 38 DCNL, 38 DCOE, 40...
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettors.
Wire thickness 1 mm and wound length 33 mm.
Number 50 on exploded view
Also suitable for the following carburettors: 38 DCOE, 40 DCOE, 42 DCOE, 45 DCOE.
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettors.
Wire thickness is 1.15mm and wound length is 31mm.
For a standard spring, please refer to REF 48075.
Number 50 on exploded view.
Also suitable for the...
In stock
Complete kit for removing and sealing the internal and external choke system on WEBER 40DCOE and 45DCOE carburetors.
Kit supplied with installation instructions.
In stock
In stock
Out of stock
WARNING: This fits with spring guide REF 48040
Suitable for WEBER 40DCOE and 45DCOE carburetors
Also suitable for: 22 IM, 26 IM, 26 IMB, 28/36 DCB, 28/36 DCD, 32 IMPE, 34 DCHD, 34 DCHE, 34 DCS, 35 DCNL, 36 DCD, 38...
Out of stock
Allows the guiding of the choke piston spring for WEBER 40DCOE and WEBER45DCOE carburettors
ATTENTION: Must be fitted with retaining ring REF 48039
Also suitable for the following carburettors: 38 DCOE, 40 DCOE, 42...
Out of stock
Starter piston spring for WEBER 40DCOE and 45DCOE carburettor
Number 55 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Number 54 on exploded view
Also suitable for: 35 DCNL, 38 DCNL, 38 DCOE, 40 DCOE, 40 DCNL, 42 DCOE, 45 DCOE.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M4X16 screw
Sold individually, requires 2 pieces for one carburetor
Number 40 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
LEFT Cable Stop
Number 42 on exploded view
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
RIGHT-HAND COVER STOP
Number 42 on exploded view
In stock
Allows you to replace the choke cover with a simple WEBER choke cover for a 40DCOE or 45DCOE carburetor.
Suitable for carburetors: 40 DCOE, 45 DCOE, 40 IDF, 44 IDF, 48 IDF.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 51 on exploded view
Out of stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 74 in exploded view
Also suitable for carburetors: 34 DCHE, 36 DCS, 40 DCOM, 45 MCHH22.
In stock
Accelerator pump piston for WEBER 40DCOE and 45DCOE
Number 53 on exploded view
Also suitable for carburetors: 32 IMPE, 38 DCOE, 40 DCOE, 42 DCOE, 45 DCOE, 48 DCOE, 48 DCO/SP, 50 DCO/SP, 55 DCO/SP.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors,
Free length : 59mm,
Wire gauge : 0.4mm,
Number 60 on exploded view
In stock
Accelerator Pump Rod Kit for WEBER 40DCOE and 45DCOE
Dimensions 54.5mm and 38.55mm (see photo)
Standard size pump rod
Number 61 on exploded view
In stock
Allows easy adjustment of the float with one side of the tool calibrated to 8mm and the other side to 9mm.
Allows direct action on the float tab thanks to a slot at the end of the tool.
In stock
Allows easy adjustment of the float with one side of the tool calibrated to 5mm and the other to 6mm.
Allows direct action on the float tab thanks to a slot at the end of the tool
In stock
Fuel pressure gauge kit.
Allows fuel pressure adjustment with the "King" filter REF 6825.
Graduation from 0.20g up to 1 bar.
With connector and clamp for 6 or 8 diameter flexible hoses.
The pressure gauge can be...
Out of stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.25mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.50mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 0.8mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
Allows control of nozzle calibration
Graduation is 0.05 mm in 0.05 mm increments, with a minimum of 0.45 mm and a maximum of 1.5 mm.
In stock
Allows control of nozzle calibration
Graduation is 0.10 mm in 0.10 mm increments, with a minimum of 1.5 mm to 3.00 mm and a maximum of 1.5 mm.
In stock
Synchronizer/Synchrometer to be placed directly in the air intake horn for timing adjustment
Suitable for all AVP air intake horns
Graduation from 1-30kg/h
Out of stock
Sold with drill bit holder
Includes 5 drill bits in each of the following sizes:
0.6mm
0.7mm
0.8mm
0.9mm
1.0mm
1.1mm
1.2mm
1.3mm
1.4mm
1.5mm
1.6mm
1.8mm
2.0mm
2.1mm
2.2mm
2.3mm
2.4mm
2.5 mm
2.6mm
2.8mm
3.0mm
3.2mm
In stock