Reinforced throttle shaft return spring for WEBER DCOE 40 and DCOE 45 carburetor

• Mounting flange for a Weber carburetor on an intake manifold or intake pipe that does not have O-rings or connecting elements.
• Provides a better seal and greater flexibility between the carburetor and the intake manifold. This isolates the carburetor from engine vibrations to prevent disturbing the settings
• Spacer sold separately with two O-rings (Two kits required per carburetor)

Spacer Specifications:

• • Mounting Hole Spacing: 74mm
  • Spacer Thickness: 5.50mm
  • Inner Diameter: Ø 45.80mm
  • Outer Diameter: Ø 64mm
  • Mounting Hole Diameter: Ø 8.3mm
  • Material: High-Quality Nylon

• Air bypass screw for carburettor WEBER 40DCOE and 45DCOE 
• Number 26 On exploded view
• Also suitable for the following carburettors: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT .

• Intake manifold mounting distance: 70mm and 110mm
• Carburetor mounting distance: 110mm and 70mm
• Flange thickness: 19.3mm
• Pipes diameter: Ø 45mm
• Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting studs (x16)

These rigid aluminum flanges replace the original "flexible" rubber flanges, which tear with wear.

• Suitable for WEBER 40DCOE and 45DCOE carburetors
• External mounting
• Fixes to the carburetor cover

Bearing Dimensions:

• Dimension: Stock dimension (Standard)
• Journal Diameter (A): Ø 51.97mm
• Housing Diameter (B): Ø 55.88mm
• Bearing Width (C): 18.68mm
• Bearing Width (C): 24.68mm
• Bearing Thickness (D): 1.92mm
• Smooth bearings with lugs and grease holes (x7) and grooves (x7)
• Bearing material:Bi-metal