Dimensions of the Large Spring:
Outer Diameter: Ø 35.90mm
Inner Diameter: Ø 27.80mm
Wire Diameter: Ø 4.1mm
Free Height (overall): 49.50mm
Dimensions of the Small Spring:
Outer Diameter: Ø 25.90mm
Inner Diameter: Ø...
Out of stock
R12 / R12G Performance & Racing Parts
Our performance and Racing spare parts for your Renault R12 / R12G
Discover here a wide selection of parts and accessories designed to improve and boost the performance of your Renault R12 / R12 Gordini.
Whether you are looking for electronic ignition, iridium spark plugs, Gordini rocker cover, camshaft sprocket, carburetor flanges, weber, spark plug wires, adjustable Koni shock absorber distribution kit....at AVP, Arnaud Ventoux Pièces, you will find everything you need for optimize the operation of your old one with quality components.
Chain 72 links
Adjustable 36 tooth sprocket and 18 tooth sprocket
Out of stock
In stock
Out of stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
In stock
Brass scabbard that replaces the original plastic one.
In stock
This lighter is suitable for:
R12.G / A310.4 (Engin 1605cm³)
Igniter to be used with a primary resistance coil between 2.5 and 3.5 ohms,
Compatible with AVP4708 and AVP4715 coils,
In stock
Suitable for:
- R4 - R6 - R8 - Caravelle - Matra jet - R12.TL - R12.TS - R15.TL - A110.V85 (810) - A110.GT4
- Type 688 / 689 / 810 engine
This igniter is to be used with a primary resistance coil between 2.5 and 3.5...
Out of stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
4 spark plug wires + 1 coil wire
Terminals on coil straight
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like to point out that our spark plug wires...
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires are...
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires are...
In stock
Blue silicone ignition harness with 90° angled terminals (long extensions integrated into the wires)
This ignition harness consists of 4 spark plug wires and one coil wire.
Terminals on coil 90° angled
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like...
In stock
4 spark plug wires + 1 coil wire
Straight terminals on coil
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like to point out that our spark plug wires...
In stock
This ignition harness consists of 4 spark plug wires and one coil wire.
Terminals on coil straight
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like...
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 125l/h
Max pressure: 0.30bar
Suction: -0.10bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm /...
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 130l/h
Max pressure: 0.15bar
Suction: -0.20bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm...
In stock
In stock
Glass bowl Ø 67mm
Filter element: Interchangeable paper cartridge
One inlet: dual size 6 and 8mm
One outlet: dual size 6 and 8mm
Regulation pressure: Regulation range from 0 to 0.6 bar
Compatible with fuel SP95 /...
In stock
In stock
Inner diameter: Ø 18mm
Outer diameter: Ø 42mm
Height: 42mm
In stock
Carburetor mounting distance to the intake manifold: 110mm and 70mm
Manifold supplied with O-rings (x2) and studs (x4) for mounting the carburetor
The carburetor is mounted directly onto the manifold. The seal is...
In stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Ideal assembly with a pair of aluminium flanges Ref: AVP6810
Out of stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 45mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock
In stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Flanges with tapping for a vacuum
Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)
Out of stock
Out of stock
In stock
In stock
In stock
In stock
Versatile "Sporty Driving" shock absorbers, ideal for road use and competition.Shock absorber hardness can be adjusted.The vehicle's ride height can be modified using the different positions of the spring retainer...
In stock
Possible adjustment of the hardness of the shock absorbers.
Versatile "sporty driving" shock absorber, ideal for road and competition use.
In stock
In stock
In stock
Out of stock
