Steering & front axle R12 / R12G
Our spare parts for the steering and front axle of your Renault R12 / R12G
Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Renault R12 / R12 Gordini.
Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, suspension spring, pedal axle, silentbloc, stabilizer bar, support, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, direct steering kit, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give your old car a new lease of life with quality components.
Suitable for:
Eye end cap of rack and pinion - Ref 0824373600 / 7700504987
Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987
Exhaust hanger - A310 V6 - Ref 7700504987
Inner diameter of the eye: Ø...
In stock
In stock
Sold individually
In stock
Plastic ring dimensions: Ø 22x31.5mm
Plastic ring width: 14.5mm
Kit contents:
Plastic guide ring x1
Rubber sealing gasket x2
Steel washer x2
Internal circlip x1
Renault OE Ref: 7701455252
In stock
In stock
In stock
Suitable for:
R12 Gordini
A310.4 / A310 V6 (From chassis no. 1 to no. 909)
Out of stock
In stock
Suitable for:
A110.1600 SC / SI (VD) / SX (VH) / A310.4 : Upper and lower rear wishbone
R12.G : Lower front wishbone, central rear wishbone
In stock
Out of stock
In stock
In stock
Minimum adjustment 36.5cm (From fixing axis to the support of the 1st washer)
Out of stock
Suitable for vehicles:
R12
R15 / R17
A310.4: VF and VE (From chassis no. 910 to the end)
A310 V6
In stock
In stock
Out of stock
Out of stock
Oil-filled shock absorbers with standard calibration (Super Comfort range)
Supplied with silentblocs, mounting washers, and spring retainers
Height under spring retainer (See dimension H): 177mm
Suitable for:
R12...
In stock
Oil-filled shock absorbers with standard setting (Super Comfort Series)
Supplied with silentblocs, mounting washers, and spring retainers
Height under spring retainer (See dimension H): 161mm
Suitable for:
R12 (All...
In stock
Versatile "Sporty Driving" shock absorbers, ideal for road use and competition.
Shock absorber hardness can be adjusted.
The vehicle's ride height can be modified using the different positions of the spring retainer...
In stock
In stock
Length taken from the axis of the upper fixing bolt to the support of the 1st washer: 10.5cm
In stock
Out of stock
Out of stock
In stock
In stock
In stock
Out of stock
Out of stock
In stock
Metric tap (ISO 6H tolerance): M12x10 (Fine pitch - Right-hand thread)
Tap length (Overall): 70 mm
Mounting drive: 7 mm square
Flat end tap, suitable for: Through holes and blind holes
Machine tap: Only one tap is...
In stock
ISO Standard: Thread Sizes 080 / 100 / 125 / 150 / 175 / 200 / 250 / 300
Thread Restoration Tool for Internal and External Threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as well as...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for taps: M5 to M12
Short tap holder - Length 100mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Lithium soap grease for use with plain and roller bearings under normal load at normal to high temperatures.
In stock
Copper grease acts as an excellent anti-corrosion agent and lubricant between two mechanical parts.
Prevents seizing of mechanical components such as studs, spark plugs, injectors, brake flanges, exhaust systems,...
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.20 mm
Grease nipple with a 7 key recess
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 13.60 mm
Grease nipple with a 7 mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 25mm
Grease nipple with an 11mm key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 15.5 mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 24mm
Grease nipple with a 9 key
In stock
Grease nipple with steel ball
Grease nipple (overall) height: 18mm
Grease nipple with a 9 key
In stock
In stock
In stock
In stock