Click for more products.
No products were found.
Click for more products.
No products were found.
×
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 1
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 2
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 1
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 2
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 1
"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching - 2

"Momo Prototipo" steering wheel, Ø 320mm, with matte silver spokes, black leather and white stitching

Reference:
4984
    • Steering wheel covered in high-quality black leather, white stitching with parallel patterns
    • Steering wheel entirely handmade
    • Steering wheel outer diameter: Ø 320mm
    • Thickness: 0mm (Flat steering wheel)
    • Steering wheel cross-section: 30mm
    • Mounting hole spacing on the hub: 6x70mm
    • Supplied with "Momo" center cap with horn

Read moreShow less
€269.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
4984
You may also like
Vintage GOTTI 3-point harness - BLACK - 1 Vintage GOTTI 3-point harness - BLACK - 1

    • For use during track days, track days, or for classic cars
    • Shoulder strap width: 49mm
    • Waist strap width: 49mm
    • Adjustable shoulder and lap belt
    • Flat 3-point mounting with included 7/16 UNF screws
    • EEC approved

Caution: For road use and to comply with the Highway Code, you must retain your vehicle's original seat belts. Not FIA approved

Reference: G041
€109.00 (tax incl.)
Add to cart
In stock
Vintage GOTTI 3-point harness - BLUE - 1 Vintage GOTTI 3-point harness - BLUE - 1

    • For use during track days, track days, or for classic cars
    • Shoulder strap width: 49mm
    • Waist strap width: 49mm
    • Adjustable shoulder and lap belt
    • Flat 3-point mounting with included 7/16 UNF screws
    • EEC approved

Caution: For road use and to comply with the Highway Code, you must retain your vehicle's original seat belts. Not FIA approved

Reference: G040
€109.00 (tax incl.)
Add to cart
In stock
Vintage GOTTI 3-point harness - RED - 1 Vintage GOTTI 3-point harness - RED - 1

    • For use during track days, track days, or for classic cars
    • Shoulder strap width: 49mm
    • Waist strap width: 49mm
    • Adjustable shoulder and lap belt
    • Flat 3-point mounting with included 7/16 UNF screws
    • EEC approved

Caution: For road use and to comply with the Highway Code, you must retain your vehicle's original seat belts. Not FIA approved

Reference: G042
€109.00 (tax incl.)
Add to cart
In stock
Customers who bought this product also bought:
12V electronic ignition kit with tray for Ducellier distributor WITHOUT depression - 1 12V electronic ignition kit with tray for Ducellier distributor WITHOUT depression - 1

  • Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
  • Compatible with coils AVP4708 and AVP4715
  • Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
  • Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
  • 12V electronic ignition kit, with magnetic trigger which allows the elimination of the breakers and the capacitor
  • Notice included
  • Supplied with 3 screws for fixing the plate
  • Instructions included
Reference: 4799
€74.00 (tax incl.)
Add to cart
In stock
Headlining - R8 - 1 Headlining - R8 - 1

  • Photo 2 shows the fabric finish (off-white, diamond-point finish)
  • The part near the sun visors is made of hardboard.
  • The mounting ribs from your old headliner should be kept.
Reference: 4970
€292.00 (tax incl.)
Add to cart
In stock
12V electronic ignition kit with plate for Ducellier distributor WITH depression - 1 12V electronic ignition kit with plate for Ducellier distributor WITH depression - 1

  • Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
  • Compatible with coils AVP4708 and AVP4715
  • Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
  • Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
  • 12V electronic ignition kit , with magnetic trigger which allows the elimination of the breakers and the capacitor
  • Notice included
  • Supplied with 3 screws for fixing the plate
  • Instructions included
Reference: 4798
€76.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in