In stock
Best sellers
This harness uses the color codes of the original wires and terminals
Harness sold with its installation plan, all the connectors are identified and labeled
Harness for mounting with original terminal boxes or modern...
In stock
In stock
In stock
Super 5 GT Turbo
In stock
In stock
headlight bulb with yellow globe
Culot 3 flat sheets
Dimensions: 45x82mm
due to the multitude of types of bulbs used, please check compatibility with your vehicle
Single-pin base / aligned pins
Dimensions: 8 x 20 mm
Due to the multitude of bulb types used, please check compatibility with your vehicle.
In stock
Fuel filter with metal cartridge, ideal for replacing plastic filters, because it's more durable.
Inlet and outlet diameter: Ø 8mm
Cartridge body diameter: Ø 55mm
Filter cartridge length: 78mm
In stock
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
M9
Sold individually, 2 required per carburetor
Number 48 on exploded view
In stock
Fuel pressure gauge kit.
Allows fuel pressure adjustment with the "King" filter REF 6825.
Graduation from 0.20g up to 1 bar.
With connector and clamp for 6 or 8 diameter flexible hoses.
The pressure gauge can be...
In stock
Allows to clamp the horns on the body of the WEBER 40DCOE carburetor
ATTENTION: essential for REF 48093 horns
Kit for a carburetor consisting of 4 stop tabs, 4 washers and 4 nuts
Also suitable for WEBER 42DCOE...
In stock
Throttle control lever for TWO WEBER 40DCOE AND WEBER 45DCOE carburetors
Allows carburetor synchronization
Suitable for R8 Gordini, Alpine A110, Simca Rallye
8mm diameter ball joint
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Part number 65 on exploded view
In stock
Accelerator pump cap for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 59 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Ducellier 4277 distributor (R253 curve) without depression (6V / 12V) - Billancourt engine - R4 / R5
This distributor is suitable for:
R4 / R5: Billancourt engines 662, 680-02, 839-06,800-01
Replaces Ducellier references 566, 2175, 4064, 4067, 4276, 4306, 4307
Compatible with SEV small diameter 53mm
Fixing by...
Out of stock
In stock
For reliability reasons, it is advisable to keep the original pinion of the distributor
Note included for installation of the pinion on the new distributor
It is advisable to mount these electronic distributors with...
In stock
In stock
Textured paint is a two-component, structured coating based on organic wax.
This high-performance texturizing agent provides optimal resistance to abrasion and rubbing and increases film hardness.
Once the hardener...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
The license plate is fixed at the bottom of the hood, for rectangular front indicators and flat front hood reinforcements.
It is advisable to perform a dry fit on all bodywork elements to check the correct alignment...
In stock
R4 (R1123): From 1976 to 1982
In stock
Out of stock
In stock
In stock
In stock
Out of stock
Assembly Group 4
In stock
Out of stock
In stock
In stock
Out of stock
Heater hose compatible with Alpine A310.4 (1st and 2nd Version):
A310.4 1600VE: From #1 to end of series
A310.4 1600VF: From #1 to end of series
In stock
Out of stock
In stock
In stock
In stock
Headlight Bulb
3-pin base / European code
Dimensions: 40X82mm
Part Number: 0854153900 / 7701348006
Due to the wide variety of bulb types used, please check compatibility with your vehicle.
In stock
Suitable for:
R5 Alpine (R1223)
R5 Alpine Turbo (R122B)
Silentbloc Dimensions:
Inner Diameter (D1): Ø 37.1mm
Outer Diameter (D2): Ø 55.2mm
Height (H1): 27mm
Height (H2): 59mm
Silentbloc Rubber Hardness: 60 Shore
In stock
Suitable for:
R5 Alpine (R1223)
R5 Alpine Turbo (R122B)
Silentbloc Dimensions:
Inner Diameter (D1): Ø 37.1mm
Outer Diameter (D2): Ø 55.2mm
Height (H1): 27.1mm
Height (H2): 32.9mm
Silentbloc Rubber Hardness: 60 Shore
In stock
In stock
This rudder is an improved version of the original rudder.
The ball joints help make the pedals' movements smoother and freer.
In stock
Lift Features:
Double-acting gas strut
With rear window defroster lugs
Mounting center distance: 430mm
Lift stroke: 180mm
Mounting eye diameter: Ø 8mm (x2)
Alpine OE Ref: 6001015967 / 6001015968 / 6001017009 /...
In stock
Lift Features:
Double-acting gas strut
Mounting center distance: 600mm
Lift stroke: 250mm
Mounting via ball joint Ø 8mm (x2)
Cylinder force: 290N
Lifts must be mounted with the rod down, with the trunk or hood...
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 305mm
Lift stroke: 120mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock