Aluminum bulkhead oil pan (With stabilizer bar passage) - A110.1600 SX/SC and A310.4
Reference:
60115
- Oil pan depth: distance from the gasket face to the bottom of the pan 112mm
- Sold with gasket and drain plug.
€680.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
 - A110.1600 SX/SC and A310.4&media=https://www.arnaudventouxpieces.com/6088-large_default/aluminum-oil-pan-partitioned-with-stabilizer-bar-passage-a1101600sx-sc-and-a3104.jpg){kind=link}
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
In stock
Customers who bought this product also bought:
In stock
In stock
- Sold with 3 fixing screws and the oil seal (Ø 17x30x7mm)
- Guide to be mounted when replacing a clutch with a graphite thrust bearing with a modern diaphragm clutch
- It is necessary to drill and tap in the clutch bell to mount the adaptation guide.
- Mounting instructions supplied with the kit
In stock
- 4 spark plug wires + 1 coil wire
- Straight terminals on coil
- Length of coil cable: 61cm
- Length of 2 spark plug cables: 26.5cm
- Length of 2 spark plug cables: 36.5cm
- We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), they do not have interference protection.
- If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.
In stock
Out of stock
In stock
- Center distance between carburetor and intake pipe : 110mm and 70mm
- Flanges with tapping for a vacuum
- Flanges to be assembled directly on the carburetors, the seal is ensured by O-rings (delivered with 4 O-rings)
Out of stock