This kit is suitable for original Bendix receivers
In stock
Best sellers
In stock
Thickness: 1.80mm (repair side)
In stock
In stock
In stock
In stock
Segment Characteristics:
Segment Diameter: Ø 75.70mm
Thickness of Upper Segments (Fire-resistant): 1.5mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 4mm
It is essential to...
In stock
For mounting a belt width: 13mm
Groove for a 5mm key
A steel collar is installed on the oil seal surface for improved sealing and reduced pulley wear.
In stock
Limited special offer
In stock
R4 (R1123): From 01/1971 (Chassis number from n°123915 to n°1587923)
R4 Van 5CV (R2106) from 01/1971 to 12/1975
R4 F4 5CV (R2391): From 01/1971
In stock
Suitable for:
R4 (R1120): From start to chassis no. 468774
R4 (R1123): From start to chassis no. 212514
Renault OE Ref: 0996027700 (Left) + 0996027600 (Right)
Steering Ball Joint Pin : M10
In stock
In stock
Segment Characteristics:
Segment Diameter: Ø 77.5mm
Thickness of Upper Segments (Fire-resistant): 1.75mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper): 4mm
It is essential to...
In stock
In stock
In stock
Out of stock
Center distance between carburetor and intake pipe : 110mm and 70mm
Ideal assembly with a pair of aluminium flanges Ref: AVP6810
Out of stock
In stock
Super 5 GT Turbo
In stock
Ignition coil without control: 1 input / 5 poles
Primary winding resistance: 0.7 ohms
Secondary winding resistance: 5600 ohms
ADVANTAGES:
Oil-free coil, no overheating
Increased ignition performance
Improved...
In stock
In stock
Oil pan depth: distance from the gasket surface to the bottom of the pan 147mm
Sold with gasket and drain plug (x3).
In stock
Single-pin base / aligned pins
Dimensions: 9 x 28 mm
Due to the multitude of bulb types used, please check compatibility with your vehicle
In stock
Overall length: 23 cm
Fixed to the door with two screws
In stock
Bearing Dimensions (Sold in packs of 12):
Crankshaft Diameter: Ø 52.30mm
Bearing Diameter: Ø 56.0mm
Width: 17.65mm
Thickness: 1.84mm
Suitable for the following engines:
Alpine A310 V6: PRV 112.730 Engine
Alpine V6...
In stock
Suitable for: 4L After 09-1974 / 34L Tank
Specifications:
Dipstick length: 170mm
Suction pipe outer diameter: 6mm
Total height: 192mm
Connection via 1 flat plug
Supplied with a quarter-turn fixing ring and gasket
In stock
In stock
In stock
Lift Features:
Double-acting gas strut
With rear window defroster lugs
Mounting center distance: 430mm
Lift stroke: 180mm
Mounting eye diameter: Ø 8mm (x2)
Alpine OE Ref: 6001015967 / 6001015968 / 6001017009 /...
In stock
Suitable for:
Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 /...
In stock
Gear knob covered in high-quality imitation leather
Resin pad with 5-speed gear selector and reverse gear (identical to the original)
Gear knob to stick on the gear lever
OE Renault Ref: 6001013385
In stock
F9 emulsion tube for WEBER 40DCOE and 45DCOE
Number 13 on exploded view
Also suitable for Weber carburetors: 32 DATR, 32 DRTA, 32 DMTRA, 48 DCOSP, 50 DCOSP, 55 DCOSP, 38 DCNL, 38 DCN, 40 DCNL, 40 DCOM, 45 DCO3, 45...
In stock
In stock
Air bypass screw locking nut for carburettor WEBER 40DCOE and 45DCOE
M5
Number 27 On exploded view
Also suitable for: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT
In stock
Air bypass screw for carburettor WEBER 40DCOE and 45DCOE
Number 26 On exploded view
Also suitable for the following carburettors: 36 DCNF 36 DCNFA 40 / 45 DCOE 40 IT .
In stock
Suitable for WEBER 40DCOE 151 and 45DCOE 152 (latest generation)
Sold individually, need 2 pieces for one carburettor
Number 56 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Banjo screw M12
Sold individually without gasket
In stock
Length: 182mm
In stock
This kit is suitable for original Bendix or remanufactured transmitters (AVP9130)
In stock
- Sold complete with support, brass cap and fitting screwed onto the jar.
- Male outlet connection 1/2"-20UNF (12.70mm)
In stock
Out of stock
In stock
Shipping available. Contact us to obtain a transport quote and find out our conditions.
Click HERE to write to us.
In stock
Versatile "Sporty Driving" shock absorbers, ideal for road use and competition.
Shock absorber hardness can be adjusted.
The vehicle's ride height can be modified using the different positions of the spring retainer...
In stock
In stock
In stock
In stock
Segment Characteristics:
Segment Diameter: Ø 74.50mm
Thickness of Upper Segments (Fire-resistant): 1.50mm
Thickness of Intermediate Segments (Waterproof): 2mm
Low ring thickness (Scraper):4mm
It is essential to...
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Triangle sold with its silentblocs (x4)
Suitable for:
A310 V6 (Phase 2): From chassis 47709 to the end of series(From 1981)
R5 Turbo 1 and 2 (8220)
Out of stock