Gear lever knob with "Selection grid" pad - R5 Alpine Turbo (122B)

Lift Features:

• Double-acting gas strut
• Mounting center distance: 600mm
• Lift stroke: 250mm
• Mounting via ball joint Ø 8mm (x2)
• Cylinder force: 290N
• Suitable only for models with 2 cylinders
• Sold individually

Lifts must be mounted with the rod down, with the trunk or hood closed.

Suitable for:

• R5 Alpine (R1223)
• R5 Alpine Turbo (R122B): From No. 38157 to No. 55999
• R5 Turbo 2 (8220): From No. 3347 to the end of the series

OE Renault Ref: 7700715773 / 7700758674

The struts must be mounted with the rod at the bottom, with the trunk or hoods closed.

In most cases, it is not possible to compress the strut by hand due to its force.

• Key Length: 56mm
• Key Width: 23.5mm

Suitable for:

• R5 Alpine (Coupe and Group 2): Front Brakes
• R12G / R17G: Front Brakes
• A310.4: Front and Rear Brakes
• A310 V6 Before 1980 (#1 to #47708): Front and Rear Brakes

Filter Dimensions:

• Inner Diameter (D2): Ø 86mm
• Outer Diameter (D1): Ø 128mm
• Height (H1): 175mm
• Height (H2): 164mm

The dimensions given are for guidance only; slight variations of a few millimeters are possible depending on availability.

Height 49mm (Extraflat)