 - ref 40062F&media=https://www.arnaudventouxpieces.com/3707-large_default/2nd-model-lower-ball-joint-from-1972-to-the-end-of-1975-ref-40062f.jpg){kind=link}
- Thickness: 1.80mm (repair side)
In stock
2nd model lower ball joint (From 1972 to the end of 1975) - ref 40062F
Reference:
9340
Drilling for fixing: x3 holes Ø 8.5mm
Fixing holes offset by 4.5mm for modification of the camber (0° instead of 1°30) and widening the front track (1275mm)
€31.00
(tax incl.)
This mounts instead of AVP9301 and AVP9303 on condition that the right and left ball joints must be changed.
Customers who bought this product also bought:
- Thickness: 1.35mm (Standard)
In stock
- Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
- Compatible with coils AVP4708 and AVP4715
- Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
- Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
- Supplied with 3 screws for fixing the plate
- Instructions included
In stock
The kit consists of the following pipes:
- Right front underbody pipe (with tappings for heating circuit): Lower radiator hose / central underbody connector - Part number 42569E
- Left front underbody pipe: Upper radiator hose / central underbody connector - Part number 42584A
- Right rear underbody pipe: Central underbody connector / hose to water pump - Part number 30238A
- Left rear underbody pipe: Central underbody connector / Hose to water pipe on cylinder head - Part number 30230E
This kit of 4 pipes is compatible for installation on a Simca Rallye 2 and a Simca 1200S, provided that the long fixing bracket of the right rear tube is replaced by a short "Type Rallye 3" bracket on the tank ventilation plate (see photo 2).
Out of stock
In stock