Best sellers
Threaded spigot diameter: M16x150
This assembly can be made from engine No. 958967 (early April 1960) on Ventoux Type 670 engines.
In stock
Tools to be used with a wrench or a socket of Size 32
In stock
Delivered without fuses
Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm
Out of stock
This headlight is designed to accept a European low-cost round-base bulb (P45T)
Outer lens diameter (overall): Ø 150mm
Glass diameter inside the trim: Ø 145mm
Sold complete with chrome headlight dish, concave lens,...
Out of stock
We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, with a standard copper core (wire material), which means they do not have interference protection.
If the vehicle is...
In stock
Connection thread: outgoing cone
Fixing distance: 25mm
In stock
Out of stock
In stock
In stock
Out of stock
In stock
This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts (Length under...
In stock
Rubber hose Ø 32mm - Length 1m (To be cut to make sleeves) - Ref 6000002152 / 6000002134 / 600000214
Cooling hose compatible with Alpine:
A310.4 1600VE: From #1 to end of series
A310.4 1600VF: From #1 to end of series
A110 SC / Si (1600VD) and SX (1600VH)
Alpine OE Ref: 6000002152 / 6000002134 / 600000214 /...
In stock
In stock
Diamond Dimensions:
Height:34mm
Width:22mm
Two mounting pins:Ø 3mm
Mounting center distance:18mm
Alpine OE Ref:0855869200 / 8558692
In stock
Headlight Bulb
3-pin base / European code
Dimensions: 40X82mm
Part Number: 0854153900 / 7701348006
Due to the wide variety of bulb types used, please check compatibility with your vehicle.
In stock
Out of stock
In stock
Connection thread: outgoing cone
Fixing distance: 25mm
In stock
In stock
In stock
In stock
Réf OE Alpine : 6000001066 + 6000001067 + 6000001068 + 6000001069 + 6000000474
In stock
In stock
In stock
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 130l/h
Max pressure: 0.15bar
Suction: -0.20bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm...
In stock
In stock
In stock
In stock
In stock
Different carburetor needles used:
Solex 32 PIBT: 1.5 (Included in the pouch)
Solex 32 PICBT: 1.7 (Not included in the pouch)
Suitable for:
Dauphine Gordini and Ondine Gordini: R1091
Floride and Caravelle: R1092
In stock
In stock
Replaces Ducellier 582012
In stock
In stock
In stock
Out of stock
Overall length: 161cm
Sheath length 1: 71cm
Sheath length 2: 54cm
Cable length: 158.5cm
Suitable for Alpine A110 1300cc / 1600cc / 1600VB
Our cables are made in France and meet the assembly and quality standards...
In stock
Screw M8x125
Total length under head: 45mm
Sold individually - Requires 4 screws per triangle
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Requires 1 part per carburetor
Number 3 on exploded view
Compatible with other WEBER carburetors, see below
In stock
In stock
In stock
Caractéristiques des segments :
Diamètre des segments : Ø 73mm
Épaisseur des segments supérieurs (Coupe-feu): 1.75mm
Épaisseur des segments intermédiaires (Étanchéité): 2mm
Épaisseur des segments inférieurs...
Out of stock
In stock
Countersunk head screw crosshead in black zinc-plated steel
Ideal for fixing:
Headlining
Interior trim, carpets, rugs
Rubber mats
In stock
Kit Contents:
Metal Washer x4
M8 Nut x1
Plastic Bushing x2
Rubber Bushing x2 (OE Ref: 7700721244 / 7700692252
OE Ref Renault / Alpine: 7700692252 / 7700689713 / 7701464136 / 7701464796
Suitable for:
R18
R21 and...
In stock
Delivered without fuses
Dimensions: Lg 154mm x W 53mm x H 43mm - Fixing distance: 144mm
Out of stock
Compatible with :
R8G R1134 (1108cm³ engine - Type 804) / R1135 (1255cm³ and 1296cm³ engine - Type 812)
Alpine A110 1108cm³ / 1289cm³ (V85) / 1300G / 1300S
R5 Turbo 1 and 2 (1397cm³)
R12.TS (1289cm³)
In stock
Suitable for gearboxes:
352 gearbox
365 gearboxes except models 365-05 / 365-06 / 365-10 (#1 to #297)
395 gearbox
Original OE Ref: 7700502803 / 7700547433
In stock
Suspension ball joints: M12x125 axle - Cone Ø 12.5mm to Ø 13.5mm
Mounting center distance on the wishbone: 42.5mm and 48.5mm
Suitable for:
R16 TS (R1151): From no. 24717 to end of series
R16 TL (R1152): From no....
In stock
In stock
In stock
Gaitor to be mounted on the steering rack equipped with original steering rods ("fork" rod)
In stock