Starter cable - R8S (R1136) - Ref 0855812700

• This ignition harness consists of4 spark plug wires and1 coil wire.
• We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, black in color, with a standard copper core (wire material), which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.

• Sold with 3 fixing screws and the oil seal (Ø 17x30x7mm)
• Guide to be mounted when replacing a clutch with a graphite thrust bearing with a modern diaphragm clutch
• It is necessary to drill and tap in the clutch bell to mount the adaptation guide.
• Mounting instructions supplied with the kit

The entire kit is made up of 3/8"-24UNF fittings

This kit is composed of the following copper pipes:

- From the brake master cylinder to the Right Front Wheel

- From the brake master cylinder to the Left Front Wheel

- From the brake master cylinder to the distributor or rear three-way connection

- From the three-way connection or rear distributor to the right rear wheel

- From the three-way connection or rear distributor to the left rear wheel