Pair of Right and Left Steering Tie Rods - R4 (Early Models - 1961 to 1964)

• Suspension ball joints: M10x125 axle - Cone Ø 10.80mm to Ø 12.50mm
• Mounting center distance on the wishbone: 40mm and 46mm
• Ball joint mounting diameter: 30.4mm
• OE Renault part number: 0981728300 / 0981711500

Suitable for:

• R4 (R1120): From start to number 468774
• R4 (R1123): From start to #212514
• R4 (R2102): From start to #74522
• R4 (R2104): From start to #27935

• Female connector: Ø 3/8"-24UNF (Ø 9.52mm) x3

Suitable for:

R4 (R1120) from start to No. 954000

R4 (R1123) from start to No. 627131

R4 (R2106) from start to #24876

• This kit contains an M9 adjustment screw nut and an M8 nut.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• The "square" symbol indicates the presence of a square seal, while the circle symbol indicates the presence of a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend that you Check the symbol displayed on each caliper, as a vehicle may have calipers of different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same assembly, as this can lead to the risk of skewing during braking.

Mounting with AVP4981 screws