Sofica Upper "S" Heater Hose

Suitable for:

• R5 All models (1st Version)
• R12 / R15 / R16 / R17
• A110 V85 / A110.1600cm³ (SI / SX / SC)
• A310.4
• A310 V6 (Before 1981)

Gasket dimensions:

• Inner diameter: Ø 20mm
• Outer diameter: Ø 33mm
• Height (excluding lugs): 5mm
• Recessed diameter: Ø 26mm
• Push button diameter: Ø 19.5mm

Also suitable for:

• Dauphine with crankshaft pulley Ø 108mm

• Tie rod/ball joint thread: M14x150(Left-hand thread)
• Tie rod sold individually
• It is possible to install it on an A310.4 using the AVP7609 adapter to replace the original "fork"-type tie rods

The AVP7606 tie rod is not compatible with the original A310 V6 M12x100 mounting, but must be assembled with the AVP7344 reinforced tie rod end.

• Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
• Delivered without seal

Suitable for vehicles:

• 4CV / Juvaquatre: Type 662 Engine (From June 1956)
• Dauphine / Dauphinoise / Estafette / Floride A106 / A108: Type 670 Engine
• R4: Billancourt Type 800-02/05 Engine (From 1962)

Bearing Dimensions:

• Dimensions: Original (Standard) Dimensions
• Crankpin Diameter (A): Ø 38.00mm
• Housing Diameter (B): Ø 41.14mm
• Bearing Width (C): 21.18mm
• Bearing Thickness (D): 1.57mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material: Bimetal