Click for more products.
No products were found.
Click for more products.
No products were found.
×
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 1
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 2
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 3
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 1
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 2
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 3
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 1
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 2
Thermo contact for water or oil temperature - 105°C - Ø 18x150 - 3

Thermo contact for water or oil temperature - 105°C - Ø 18x150

Reference:
1744

To turn on a temperature warning light

Trigger temperature 105°C

Read moreShow less
€12.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
1744
Customers who bought this product also bought:
Kit of 1 paper seals + 1 carburettor base heat seal - Ø 22mm - 1 Kit of 1 paper seals + 1 carburettor base heat seal - Ø 22mm - 1

Kit containing a paper gasket and a specific thermal spacer/gasket.

The thermal spacer insulates the carburetor from engine heat, thereby limiting vapor lock issues.

Gasket specifications:

  • Mounting hole spacing: 44mm
  • Mounting hole diameter: Ø 7mm
  • Inner diameter: Ø 23mm
  • Paper gasket thickness: 0.7mm
  • Thermal spacer thickness: 1.3mm
  • Material: Paper gasket / Thermal spacer
  • Sold as a 2-piece kit
Reference: 1817
€4.50 (tax incl.)
Add to cart
In stock
Adjustable rear brake limiter - ref 8555678 - 1 Adjustable rear brake limiter - ref 8555678 - 1

This brake limiter replaces the original non-adjustable rear brake proportioning valve.

The limiter is not load-dependent (it does not vary according to the vehicle's load).

Its adjustment is manual, using the calibration screw. Adjustment can be made either statically, using brake pressure gauges and referring to the manufacturer's data, or dynamically (see description below).

Limiter specifications:

  • Inlet thread (x1): 3/8-24UNF (Male cone)
  • Outlet thread (x2): 3/8-24UNF (Male Taper)
  • Mounting Screw Hole Diameter: Ø 8.5mm
  • Limiter Adjustment Range: 5 turns
  • Limiter delivered unadjusted (screw loosened): Rear brake pressure limited to maximum
Reference: 4430
€90.00 (tax incl.)
Add to cart
In stock
Concave headlight lens for European code bulb - Ø 145mm (Top quality Cibié type) - 2 Concave headlight lens for European code bulb - Ø 145mm (Top quality Cibié type) - 2

  • This headlight is designed to accept a European code type bulb with a round base (P45T)
  • Outer diameter of the lens (overall): Ø 150mm
  • Diameter of the lens inside the bezel: Ø 145mm
  • Sold complete with chrome headlight dish, concave lens, and bulb holder
  • Mounting: Right or Left
  • Sold individually

Suitable for:

  • Dauphine and Ondine
  • R4: After 01/1971
  • Estafette: Since September 1968
  • R8: R1130 and R1132
  • R10: Before 09/1967

Reference: 2704
€78.00 (tax incl.)
Add to cart
In stock
Oil filter plate with threaded sleeve for oil cooler assembly - 1 Oil filter plate with threaded sleeve for oil cooler assembly - 1

The oil filter sandwich plate fits between the oil filter and the engine block.

It offers improved oil flow thanks to wider, unrestricted internal channels, making it ideal for installing an additional oil cooler.

  • Inlet and outlet ports (female):1/2" x 14 BSP (x2)
  • Oil filter threaded adapter diameter:Male Ø 3/4"-16 UNF and female Ø 3/4"-16 UNF
  • Two female ports: 1/8-27 NPT (for mounting oil pressure and temperature sensors)

Please note: this oil filter plate is not compatible with OEM hoses and fittings. You will need to replace these fittings and hoses.

Reference: 4083
€84.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in