Steel insert with tapered seat
For wheel nuts with a 60° cone
Bottom diameter of the tapered seat: 21.5 mm
Inner diameter: 14 mm
Overall outer diameter: 28 mm
Overall height: 11 mm
In stock
Best sellers
Suitable for the following vehicles:
R4 / 4L: Type R1120 - R1121 - R1122: all models
R4 / 4L: Type R1123 - R1124: all models
R4 / 4L: Type R1126: from 1971
R4 / 4L: Safari: from 1971
R4 / 4x4 Sinpar (Sedan): from...
In stock
Mounts between the front and rear mufflers.
Reference: 0354192100
Inlet pipe diameter: Ø 40mm (inner)
Outlet pipe diameter: Ø 40mm (outer)
Suitable for:
R16 L (R1150) from 1965 to 1968
In stock
Lever that connects the primary handbrake cable to the secondary handbrake cable.
Three possible positions for attaching the primary handbrake cable (Spanish & French models)
Alpine OE Ref: 6000000010 / 6000001680
In stock
Sold individually
OE Renault Ref: 0428245200 / 7702144008
In stock
Suitable for:
R25 (All models): Driver's or passenger's front and rear wipers
Alpine GTA and Le Mans (V6 GT (D500) and V6 Turbo (D501 and D502): Driver's or passenger's front wipers
Alpine A610 (D503): Driver's or...
In stock
Suitable for:
R19 (All Models): Driver's or Passenger's Front Wiper
R21: Driver's or Passenger's Front Wiper
Clio Williams (From 03/1994): Driver's or Passenger's Front Wiper
In stock
Suitable for:
Super 5 (All models): Driver's or passenger's front wiper
R20 / R30: Driver's or passenger's front and rear wiper
R21: Rear wiper
Clio Williams (Up to 02/1994): Driver's or passenger's front wiper
In stock
Metal frame window seal covered with felt and rubber
Length of the seals: 70 cm
Window seal with 7 clips per piece (28 clips in total)
Kit for 4 doors: the two front doors and the two rear doors
OE Renault Ref.:...
In stock
Fixed with two threaded studs with M5 nuts
Fixing center distance: 90mm
Overall length: 120mm
In stock
Interior door trim in Grey faux leather and rigid storage compartment mounted on hardboard
Fabric trim to be glued to the bottom of the door with neoprene glue; no drilling is required.
Compatible with all 4CV...
Out of stock
In stock
Inner door panels in black leatherette with black stitching mounted on hardboard
Set of 4 trim pieces for the two front doors and two rear doors
Drilled holes for the original mounting clips. (56 clips required)...
In stock
Hose Specifications:
Overall Length: 410mm
Thread/Tap: Male M10x100 and Female M10x100
Suitable for: Front Right or Front Left
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
In stock
1-pin flat base
Dimensions: 24 x 62.5 mm
Due to the wide variety of bulb types used, please check compatibility with your vehicle.
In stock
1-pin base / aligned pins
Dimensions: 25x47 mm
Due to the multitude of bulb types used, please check compatibility with your vehicle.
In stock
The mounting points on the strut (bolts) are offset.
Oil-filled shock absorbers with original equipment settings allow you to replace your shock absorbers with models that provide comfort and handling comparable to...
In stock
In original black imitation leather.
In stock
In stock
Front left and right floor mats
Black with blue leather "A"
Premium quality, Made in France
In stock
Original grade spark plug, recommended for stock or lightly tuned vehicles.
Features:
Thread Type: M14x1.25
Thread Length: 19mm
Spark Plug Wrench Diameter: 16
Suitable for:
Clio 1.8L 16S (Phase 1 and 2)
Clio...
In stock
Ignition curve designed for unleaded fuel SP95 / SP98
In stock
6mm thick clear glass, laminated with double curvature and R43 approved
Original white enamel screen printing for the vertical lines (omitting the Cibié logo)
Identical to the original "Cibié" headlight lenses
In stock
6mm-thick clear glass, laminated with double curvature and R43 approved
Original white enamel screen printing for the vertical lines (omitting the Cibié logo)
Identical to the original "Cibié" headlight lenses
In stock
In stock
Length under head : 40.5 mm
Significantly higher strength than the original
Ideal for tuned engines
In stock
Allows control of nozzle calibration
Graduation is 0.05 mm in 0.05 mm increments, with a minimum of 0.45 mm and a maximum of 1.5 mm.
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
RIGHT-HAND COVER STOP
Number 42 on exploded view
In stock
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox
Resistant to 180°C
Capacity: 500ml
Color: Orange RAL 2002
Applicable directly with a brush or spray gun by diluting the paint with thinner...
In stock
In stock
The kit consists of:
x2 Front fender strips
x2 Front door strips
x2 Rear door strips
x2 Rear fender strips
In stock
Suitable for:
Alpine GTA V6 Turbo (Type D501 Z7U engine)
R19 (All models)
R21 2.0L Turbo
R25 V6 and V6 Turbo
In stock
In stock
Dimension : 170x113mm
Fixing center distance: 66mm
In stock
In stock
In stock
In stock
It is recommended to perform a dry fit of all body components to ensure proper alignment. Adjustments may be necessary.
Shipping available. Contact us to obtain a transport quote and find out our conditions....
Out of stock
In stock
Out of stock
In stock
In stock
OE Renault Ref: 0607163900 / 7703065060
In stock
In stock
R1123 - 0.8 - 19 kw from 01/81 to 12/82 R1123 - 0.8 - 25 kw from 09/72 to 08/86 R1128 s 128 - 1.1 - 25kw from 06/78 to 07/82 R2106 - 08 25 kw from 09/66 to 12/88 R2370 - 210 B 25 kw from 10/76 to 07/82
Out of stock
In stock
In stock
In stock
In stock
In stock
Left Side (Driver's Side)
Lens with aligned and centered mounting holes
Mounting hole spacing (x2 screws): 127mm
Height: 15mm
Color: Transparent / Orange
Sold individually
In stock
Right Side (Passenger)
Lens with aligned and centered mounting holes
Mounting hole spacing (x2 screws): 127mm
Height: 15mm
Color: Transparent / Orange
Sold individually
In stock
Stainless steel collar: Width 7mm
In stock
Membrane Specifications:
Stem Length (Overall): 8.4 mm
Stem Diameter: 4.6 mm
Cup Diameter: 15.5 mm
Membrane Mounting Hole Spacing: 26 mm
In stock
Screw Specifications:
Smooth Body Diameter: Ø 8.8mm
Thread Diameter: M8
Length Under Head: 46mm
Sold Individually
Renault OE Reference: 7703002001
In stock
Pulley Specifications:
Pulley mounting diameter: Ø 35mm
Pulley outer diameter: Ø 130mm
Builts a 10mm wide belt
Keyway width: 5mm
Pulley fixing bolt offset: 28mm
Belt offset: 20mm
Ref. OE Renault: 0824397802 /...
In stock
Complete carburetor overhaul kit including:
Floor bowl gasket
Base gasket
Heat shim
Copper gasket
Diaphragms
Suitable for:
R12 TL / L (R1170 and R1330):1289cc engine - Type 810-02
In stock
This kit allows you to replace the selector control shaft seal without having to disassemble the gearbox or remove the selector control.
Installing this kit may result in stiffer and less smooth gear selection due to...
In stock
Universal indicator light Crystal red: 6V / 12V
Diameter: Ø 10mm
Sold without bulb
Requires a BA7S base bulb: Reference AVP4756 (6V) - AVP4760 (12V)
Also available in: green, blue, yellow
In stock
