Suitable for the following vehicles:
R11 Turbo: B375: From 09/1986 -> 1991
R11: B376: From chassis D00043790: From 09/1986 -> 1991
R11: B376: From chassis H00017727: From 1984 -> 1991
R11: B37D - B37E - B37L...
In stock
Best sellers
Suitable for the following vehicles:
R11: B371 - B372 - B373 - B374 - B37J - B37S: From 1981 -> 1991
R11 Turbo: B375: until 09/1986
R11: B376: from chassis D00043789: until 09/1986
R11: B376: from...
In stock
Suitable for the following vehicles:
ESTAFETTE: ALL MODELS: from 1959 -> End of Series
In stock
Suitable for the following vehicles:
R5: All models: from 1972 -> 1985: Except R5 LS / TS / TX / Alpine / Alpine Turbo / Rodeo
R7: ALL MODELS
In stock
Suitable for the following vehicles:
R4 / 4L: Type R1120: from chassis number 954001: from 10/1968
R4 / 4L: Type R1123: from chassis number 627132: from 07/1968
R4 / 4L: Type R1126: from 1971
R4 / 4L Safari: from...
In stock
Inlet tube diameter: Ø 32mm (inner)
Outlet tube diameter: Ø 35mm (outer)
Flange diameter: Ø 48mm (outer)
In stock
Reference: 0821017600 / 0821214500
Inlet tube diameter: Ø 32mm (external)
Outlet tube diameter: Ø 30mm (external)
In stock
Suitable for: R16TS / R16TX / R16TXA
Part Number: 7700513569 / 1108173001
Inlet Tube Diameter: Ø 50mm (internal)
Outlet Tube Diameter: Ø 45mm (external)
In stock
Suitable for: R16 / R16L / R16TA / R16TL
Part Number: 7700513568
Inlet Tube Diameter: Ø 40mm (internal)
Outlet Tube Diameter: Ø 45mm (external)
In stock
Part Number: 0354192100
Inlet Tube Diameter: Ø 40mm (internal)
Outlet Tube Diameter: Ø 40mm (external)
In stock
Reference : 0354302711 / 0354241800 / 0354192200 / 0354235800
Inlet Tube Diameter: Ø 36mm (internal)
Outlet Tube Diameter: Ø 40mm (external)
In stock
Master Cylinder Specifications:
Piston Diameter: Ø 22.2mm
Number of Outlets / Threads: x2 / M10x100
Number of Outlets / Threads: x2 / M12x100
Mounting Center Distance: 60mm
Master Cylinder Sold Individually
In stock
ELF EVOLUTION R-TECH SPORT 0W-40 has been designed to meet the specifications of Renault Sport and Alpine engines:
International Specifications: ACEA C3
Approved Manufacturer Specifications: RENAULT RN17 RSA...
In stock
Wheel cylinder diameter: Ø 28.58mm (1" 1/8)
Female connector: Slanted - Ø 3/8" - 24UNF (Ø 9.52mm)
Mounting center distance: 36mm / M6 screw
Wheel cylinder width: 73mm
Suitable for:
Juvaquatre (R2100): 4CV...
In stock
Suitable for:
Clio Williams (Up to 02/1994): Rear Windscreen Wiper
In stock
Mounting distance: 11.5 cm
Overall length: 13 cm
Height: 3.5 cm
In stock
Rigid "Bark Brown" colored fabric trim mounted on hardboard
Trims to glue or screw
Kit includes: Two center pillars and two rear wheel arches
In stock
Seat cover in gray leatherette and plaid fabric (Red / Blue and gray)
Kit contents:
Front seat cover: Seat, backrest, and headrest
Rear seat cover: Seat and backrest
In stock
Interior door trim in "Brown Bark" fabric and rigid storage compartment mounted on hardboard
Fabric trim to be glued to the bottom of the door with neoprene glue; no drilling is required.
Compatible with all 4CV...
In stock
Inner door panels in black leatherette with white stitching mounted on hardboard
Set of 8 trim pieces for the two front doors and two rear doors
Drilled holes for inserting the original AVP4974 or AVP2949 mounting...
In stock
Adaptable leather gear knob with visible stitching
Knob dimensions:
Knob diameter: Ø 47.5mm
Knob height: 60mm
Supplied with 3 different tips to fit all types of levers (screwed or glued):
Chrome screw-on tip:...
In stock
Mounting center distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault...
In stock
Bearing Dimensions (Sold x12):
Crankshaft Diameter: Ø 59.99mm
Bearing Housing Diameter: Ø 63.72mm
Width: 17.72mm
Thickness: 1.84mm
Suitable for the following engines:
Alpine GTA V6 Turbo (D501 and D502) and Renault...
In stock
Neoprene-type contact adhesive in a jar, extra strong, adheres to many materials such as leather, fabrics, plastic, woodwork, etc.
Recommended for interior installation (headliner, carpet, imitation leather, etc.)...
In stock
Last generation WEBER 45DCOE 152 carburetor
Supplied with 62mm length cones
3 progression holes with screw-on cap
Different control levers are available see reference: AVP 48063 or AVP 48062
Supplied with the...
Out of stock
Complete carburettor SOLEX 26DIS5 for Renault 4
Suitable for 750 cm3 R1120 and 850 cm3 R1123-R1124
In stock
Suitable for 1100/1300 GORDINI
Supplied with M7 stud, washer, and nut
In stock
Black faux leather interior door panels mounted on hardboard for Alpine A110 with square handle (post-1973)
Set of 4 trim panels for both doors
Drilled for inserting the original AVP 4974 mounting clips (34 clips...
In stock
The mounting points on the strut (screws) are aligned.
Shock absorbers with original calibration give you the option to replace your shock absorbers with models that provide comfort and handling comparable to those...
In stock
Dimensions: 660mm x 505mm
Must only be installed with AVP ref 699042 + AVP 699043 + AVP 699044 + AVP 699045
Warning: Carefully check the dimensions of the luggage compartment
In stock
In stock
Black faux leather gear shift cover for Renault Alpine A110
Black faux leather sewn onto 12mm thick foam
Recommended installation with BOSTIK glue Ref,,,,,,,,,,,,,,,,,
In stock
Black quilted trim for the Renault Alpine A110 center tunnel
Black faux leather sewn onto 12mm thick foam
For body tunnels after 1968, width 100mm
In stock
Black quilted trim, left side, for Renault Alpine A110
Black faux leather sewn onto 12mm thick foam
Recommended installation with BOSTIK glue Ref,,,,,,,,,,,,,,,
In stock
In stock
Recommended installation with BOSTIK glue Ref.,,,,,,,,,,,,,,,,
In stock
Alpine A110 throttle cable cover
In original black imitation leather.
In stock
Front left and right floor mats
Black with blue leather "A"
Premium quality, Made in France
In stock
Ignition curve designed for unleaded fuel SP95 / SP98
Platinum-plated screw with externally adjustable contact points
Replaces DUCELLIER distributors: 525055 / 525056 / 4215 / 4217 / 4235 / 4236 / 4434
Suitable for...
In stock
Ignition curve designed for unleaded fuel SP95 / SP98
Kit to be used with a coil with a primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Instructions included
In stock
Oil-filled shock absorbers with standard calibration (Super Comfort range)
Supplied with silentblocs, mounting washers, and spring retainers
Height under spring retainer (See dimension H): 177mm
Suitable for:
R12...
In stock
6mm thick clear glass, laminated with double curvature and R43 approved
Original white enamel screen printing for the vertical lines (omitting the Cibié logo)
Identical to the original "Cibié" headlight lenses
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 585mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 610mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Lifts must be mounted with the rod at the bottom, with the case or hood closed.
In most...
In stock
Suitable for GOTTI rims with 6mm diameter mounting holes
Kit includes:
45mm bolts x12
Aluminum cleat x12
Nut washer x24 (requires 2 nut washers per bolt)
Nut x12
In stock
In stock
Sheets (x4)
Sheet Dimensions:
Sheet Bore Diameter: Ø 77.8mm
Sheet Flange or Top Diameter (D): Ø 96mm
Sheet Base Diameter (A): Ø 82.50mm
Sheet Height (including skirts, overall) (C): 143.50mm
Sheet Height to Base...
In stock
Installation into the R18 Turbo engine block requires no modifications or machining
The use of GS 700 cast iron liners is not necessary; these liners are thicker.
In stock
Suitable for:
Florida S (1962-1967): Engine 689-01 and 689-02 (1962-1967)
Caravelle (1962-1967): Engine 689-01 and 689-02 (1962-1967)
R8 (1962-1967): Engine 689-01 and 689-02
Sets are supplied with the following:...
In stock
Suitable for 1565cc engines (Type 821-01 / 821-02 / 821-03 / 821-04 / 821-10 / 821-11 / 821-15):
R12 TL / Export
R15 TL / TS / Export
R16 L / TL / TA / TL Automatic: 1565cc engine (Type 821-01 / 821-02 / 821-03 /...
In stock
Length under head: 40.5mm
Significantly greater strength than the original, ideal for tuned engines.
Suitable for:
Renault Clio 1.8 L 16S (F7P Engine)
Clio Williams 2.0L 16S (F7R Engine)
Clio RS 2.0L 16S (F4R Engine)
In stock
Fits driver or passenger side
Slider adjustment range: 120mm forward and 93mm rearward
Slider height: 24mm
Double locking mechanism
Compatible with AVP 69118 and AVP 69119 seats
Out of stock
Mahogany steering wheel with glossy zebrawood finish and anatomic rear section
Entirely handcrafted steering wheel
Steering wheel outer diameter: Ø 350mm
Flushing: 37mm
Steering wheel cross-section: 27mm
Hub mounting...
Out of stock
Steering wheel covered in high-quality black leather with white stitching and parallel patterns
Steering wheel entirely handmade
Steering wheel outer diameter: Ø 350mm
Dotting: 39mm
Steering wheel cross-section:...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 83 on exploded view
In stock
Allows control of nozzle calibration
Graduation is 0.05 mm in 0.05 mm increments, with a minimum of 0.45 mm and a maximum of 1.5 mm.
In stock
This kit is made up of the following copper pipes:
- from the brake master cylinder to the pressure drop indicator (1/2"-20UNF connection)
- from the brake master cylinder to the pressure drop indicator (3/8"-24UNF...
In stock
Out of stock
In stock
Limited special offer
In stock
Segment Characteristics:
Segment Diameter: Ø 75.70mm
Thickness of Upper Segments (Fire-resistant): 1.00mm
Thickness of Intermediate Segments (Waterproof): 1.20mm
Low ring thickness (Scraper): 2.5mm
It is essential...
In stock
In stock
In stock
Segment Characteristics:
Segment Diameter:Ø 60mm
Thickness of Upper Segments (Fire-resistant): 1.50mm
Thickness of Intermediate Segments (Waterproof): 1.50mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
Out of stock
Out of stock
Heater hose compatible with Alpine A310.4 (1st Version):
A310.4 1600VE: From #1 to #1002
A310.4 1600VF: From #1 to #21002
In stock
