Heater hose: Left underbody hose / Heater tap - Ref 6000002261

Heater hose compatible with Alpine A310.4 (1st Version):

• A310.4 1600VE: From #1 to #1002
• A310.4 1600VF: From #1 to #21002

Flexor Specifications:

• • Mounting hole spacing:4 x 50.50 mm
  • Mounting hole diameter: Ø 8.4 mm
  • Center hole diameter:Ø 10.50 mm
  • Flexor thickness: 11 mm
  • Material:Rubber flexor with metal reinforcement
  • Supplied with 4 x M8 x 20 mm screws and 4 x nylock nuts

For some assemblies with a center screw, replacing this screw with a socket head cap screw (SHCS) or modifying the flexor may be necessary.

Heater Hose Clamp Kit compatible with Alpine A310.4 (1st Version):

• A310.4 1600VE:From #1 to #1002
• A310.4 1600VF: From #1 to #21002

• Paper gasket thickness: 1.6 mm
• Suitable for all 1565cc / 1596cc / 1605cc and 1647cc engines

• We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, with a standard copper core (wire material), which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.
• Coil wire length: 64 cm

For mounting with Ø15mm control shafts