Pulley Specifications:
Pulley mounting diameter: Ø 35mm
Pulley outer diameter: Ø 130mm
Builts a 10mm wide belt
Keyway width: 5mm
Pulley fixing bolt offset: 28mm
Belt offset: 20mm
Ref. OE Renault: 0824397802 /...
In stock
Best sellers
Complete carburetor overhaul kit including:
Floor bowl gasket
Base gasket
Heat shim
Copper gasket
Diaphragms
Suitable for:
R12 TL / L (R1170 and R1330):1289cc engine - Type 810-02
In stock
Lighting switch (Off / Parking light / Low beam / High beam) and horn
5-pin + 4-pin connector
Renault OE part numbers: 7701349477 / 7701349479 / 7700711168 / 7701349385 / 251106
Suitable for:
R5 (All models): L /...
Out of stock
Circle diameter: Ø 50mm
Sticker on transfer paper, ready to apply
Round sticker with a white background, allowing you to add your own numbers for competition use.
Supplied without numbers.
Apply to doors, hood, or...
In stock
Fuel pump sold with its gasket
Inlet and outlet tube diameter: Ø 8mm
Renault / Valeo OE Ref: 7700740188 / 7700740194 / 247271
Suitable for:
Super 5 TR / GTR: C1C / C1E / C1G engine
R19 R / GTR / TRE: C1G / C1J...
In stock
Hose inner diameter (Radiator side): Ø 24mm
Hose inner diameter (Thermostat side): Ø 40mm
Simca OE Ref: 22314J / 1245 (Hutchinson)
Suitable for:
Simca 1000 (From 1962 to May 1964): 315 Engine (With thermostat in...
In stock
Hose inner diameter (Crankcase side): Ø 24mm
Hose inner diameter (Water pump side): Ø 30mm
Simca OE Ref: 22101N / 1248 (Hutchinson)
Suitable for:
Simca 1000 (From 1962 to early 1968): 315 Engine
In stock
Hose inner diameter: Ø 24mm
Simca OE part number: 29976Z
Suitable for:
Simca 1000 GL / GLS (from 1968): Engine 349 / 349S / 351
Simca 1000 Rallye: Engine 351
Simca 1000 Rallye 1: Engine 371
In stock
Hose inner diameter: Ø 24mm
Simca OE Ref: 29982Q
Suitable for:
Simca 1000 GL / GLS (from 1968): Engine 349 / 349S / 351
Simca 1000 Rallye: Engine 351
Simca 1000 Rallye 1: Engine 371
In stock
Screw length under head: 35mm
Screw pitch: 175
Sold individually
Renault OE part number: 7703001203
In stock
Silencer supplied with 1 connecting pipe with adjustable height flange (For original manifold and Autobleu manifold)
Silencer inlet pipe height: 10cm
Inner diameter of the pipe at the silencer inlet: Ø 45mm
Inner...
In stock
Tube diameter: Ø 17x22mm
Tube length: 80mm
Renault OE part number: 6051473
In stock
Stem length (overall): 18.25 mm
Stem diameter: Ø 1.5 mm
Cup diameter: Ø 14 mm
Center-to-center distance of membrane mounting holes: 27 mm
In stock
Seal dimensions:
Hole spacing: 92mm and 45mm
Seal length (overall): 11.3mm
Seal width (overall): 6.5mm
In stock
In stock
In stock
For RALLYE 1 / RALLYE 2 / 1200S
Inlet tube diameter: Ø 42mm (outer)
Outlet tube diameter: Ø 42mm (outer)
In stock
Inlet tube diameter: Ø 37mm (inner diameter)
Outlet tube diameter: Ø 45mm (outer diameter)
In stock
Mounts between the front exhaust pipe and the rear muffler. See photo #2
Renault OE Ref: 7701365697 / 7700657468
Inlet pipe diameter: Ø 32mm (outer)
Outlet pipe diameter: Ø 32mm (outer)
Suitable for:
R4 (1108cc)...
In stock
Mounts between the front silencer and the rear pipe. See photo #2
Renault OE Ref: 7700515611 / 0820471900 / 0256256200
Inlet Tube Diameter: Ø 30mm (inner)
Outlet Tube Diameter: Ø 32mm (inner)
Suitable for:
R4...
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R19:Rear Brakes
Clio 1.8L 16V: Rear Brakes
Clio Williams-16V: Rear Brakes
Pad dimensions:
Width: 105mm
Height: 54.9mm
Thickness:...
In stock
Velcro fastening
Black imitation leather interior door panels mounted on reinforced panels for Alpine A110 with round handle (up to 1973)
Set of 4 trim pieces for both doors
Premium finish
In stock
Velcro fastening
Black leatherette interior door panels mounted on reinforced panels for Alpine A110 with round handle (up to 1973)
Set of 4 trim pieces for both doors
Premium finish
In stock
Black simili leather sewn onto 12mm thick foam
In stock
Black simili leather stitched onto 12mm thick foam
In stock
The mounting points on the strut (bolts) are offset.
Maxigaz Sport Driving shock absorbers replace the original oil-filled models with higher-performance gas technology, ideal for intensive use in sport driving,...
In stock
Suitable for the following vehicles:
R5: All models: from 1972 -> 1985: Except R5 LS / TS / TX / Alpine / Alpine Turbo / Rodeo
R7: ALL MODELS
In stock
Suitable for: R16TS / R16TX / R16TXA
Part Number: 7700513569 / 1108173001
Inlet Tube Diameter: Ø 50mm (internal)
Outlet Tube Diameter: Ø 45mm (external)
In stock
Mounts between the intermediate pipe and the exhaust outlet pipe
Renault OE Ref: 0821684600 / 7700562545
Inlet Pipe Diameter: Ø 40mm (inner)
Outlet Pipe Diameter: Ø 35mm (outer)
Suitable for:
R16 L (R1150) from...
In stock
Suitable for:
Clio Williams (Up to 02/1994): Rear Windscreen Wiper
In stock
Suitable for:
Super 5 (All models): Driver's or passenger's front wiper
R20 / R30: Driver's or passenger's front and rear wiper
R21: Rear wiper
Clio Williams (Up to 02/1994): Driver's or passenger's front wiper
In stock
Mounting distance: 11.5 cm
Overall length: 13 cm
Height: 3.5 cm
In stock
Rigid "Bark Brown" colored fabric trim mounted on hardboard
Trims to glue or screw
Kit includes: Two center pillars and two rear wheel arches
In stock
Interior door trim in Grey faux leather and rigid storage compartment mounted on hardboard
Fabric trim to be glued to the bottom of the door with neoprene glue; no drilling is required.
Compatible with all 4CV...
In stock
Seat cover in gray leatherette and plaid fabric (Red / Blue and gray)
Kit contents:
Front seat cover: Seat, backrest, and headrest
Rear seat cover: Seat and backrest
In stock
Interior door trim in "Bark Grey" fabric and rigid storage compartment mounted on hardboard
Fabric trim to be glued to the bottom of the door with neoprene glue; no drilling is required.
Compatible with all 4CV...
In stock
Inner door panels in black leatherette with white stitching mounted on hardboard
Set of 8 trim pieces for the two front doors and two rear doors
Drilled holes for inserting the original AVP4974 or AVP2949 mounting...
In stock
Bearing Dimensions (Sold x12):
Crankshaft Diameter: Ø 59.99mm
Bearing Housing Diameter: Ø 63.72mm
Width: 17.72mm
Thickness: 1.84mm
Suitable for the following engines:
Alpine GTA V6 Turbo (D501 and D502) and Renault...
In stock
Headlight Bulb
3-pin base
Dimensions: 47.5X82mm
Part Number: 7703097171 / 7703097170
Due to the many different bulb types used, please check compatibility with your vehicle.
In stock
Dimensions: 11X41mm
Part Number: 7701348083
Due to the many different bulb types used, please check compatibility with your vehicle.
In stock
The mounting points on the strut (bolts) are aligned.
Oil-filled shock absorbers with original equipment specifications allow you to replace your shock absorbers with models that provide comfort and handling...
In stock
Warning: This part number must only be installed for a luggage compartment measuring 660mm x 505mm
Must only be installed with part number AVP 699041 + AVP 699042 + AVP 699044 + AVP 699045
Warning: Please check the...
In stock
Dimensions:
Must be installed only with AVP ref 699041 + AVP 699043 + AVP 699044 + AVP 699045
Caution: Check the luggage compartment dimensions carefully
In stock
Recommended installation with BOSTIK glue Ref.,,,,,,,,,,,,,,,,,,
In stock
In stock
Black faux leather sewn onto 12mm thick foam
In stock
Black faux leather sewn onto 12mm thick foam
In stock
Black quilted trim, left side, for Renault Alpine A110
Black faux leather sewn onto 12mm thick foam
Recommended installation with BOSTIK glue Ref,,,,,,,,,,,,,,,
Out of stock
In stock
Recommended installation with BOSTIK glue Ref.,,,,,,,,,,,,,,,,
In stock
The dashboard includes locations for the following components (from left to right):
Windshield washer pump
Left air vent
Windshield wiper switch
High beam headlight switch
Fuel level indicator
Tachometer
Speedometer...
In stock
Lift Features:
Double-acting gas lift
Mounting center distance: 610mm
Lift stroke: 250mm
Mounting eye diameter: Ø 8mm (x2)
Cylinder force: 300N
Only suitable for models with 2 cylinders, for single cylinders, use...
In stock
Suitable for:
Florida S (1962-1967): Engine 689-01 and 689-02 (1962-1967)
Caravelle (1962-1967): Engine 689-01 and 689-02 (1962-1967)
R8 (1962-1967): Engine 689-01 and 689-02
Sets are supplied with the following:...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 83 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Number 54 on exploded view
Also suitable for: 35 DCNL, 38 DCNL, 38 DCOE, 40 DCOE, 40 DCNL, 42 DCOE, 45 DCOE.
In stock
Throttle valve for WEBER 45DCOE carburetor
Angle of 78°
Outer diameter of the valve: Ø 46mm
Center distance of the mounting holes: 16mm
Number 33 on the exploded view
In stock
Suitable for older generation WEBER 45DCOE carburetors (the bearing surfaces differ from the shafts of modern versions)
Caution: The throttle plates or flaps must be mounted using flat-head screws. (AVP48052)
The...
In stock
This kit is made up of the following copper pipes:
- from the brake master cylinder to the pressure drop indicator (1/2"-20UNF connection)
- from the brake master cylinder to the pressure drop indicator (3/8"-24UNF...
In stock
In stock
In stock
In stock
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty...
In stock
In stock
Segment Characteristics:
Segment Diameter:Ø 60mm
Thickness of Upper Segments (Fire-resistant): 1.50mm
Thickness of Intermediate Segments (Waterproof): 1.50mm
Low ring thickness (Scraper): 3.5mm
It is essential to...
In stock
Front fender repair panel.
It is recommended to perform a test fit on all body panels to check their alignment.
Some adjustments may be necessary.
In stock
Out of stock
Out of stock