Spray paint for front trunk or engine compartment "Stone Effect - Dark Grey"

Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm

• Textured paint is a two-component, structured coating based on organic wax.
• This high-performance texturizing agent provides optimal resistance to abrasion and rubbing and increases film hardness.
• Once the hardener (supplied) is added to the can, the mixture is ready for proper distribution of the grains.

These mounts improve the reliability and stability of the gearbox, whether for daily driving or competitive use.

These mounts are direct replacements for the original ones; no modifications are required.

Installation advice:

• When installing the side mounts, ensure the two metal plates of the mount are perfectly parallel to each other to prevent premature wear or tearing of the mount.
• Depending on the gearbox and mounting bracket models, spacing with one or two thick washers (+/- 2 mm per washer) may be necessary between the mount and the gearbox at the mounting studs. On other models, no spacing is required; installation can be performed without applying stress to the assembly.

• This ignition harness consists of4 spark plug wires and1 coil wire.
• We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, black in color, with a standard copper core (wire material), which means they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.

Bumper height: 90mm