Upper radiator hose - R2 / R3 - Ref 42522P

Sold with O-ring

• For use with a temperature meter (water or oil)
• Wires with a 6.3mm spade terminal

Suitable for:

• Simca 1000: Drum Brake
• Simca R1 / R2 / R3: Disc Brake
• Simca 1200S (After 1970) / CG: Disc Brake

Bearing Dimensions: Ø 27x50.3x14.2mm and Ø 20x47x15.2mm

Oil Seal Dimensions: Ø 38x52x8mm

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• 12V electronic ignition kit, with magnetic trigger which allows the elimination of the breakers and the capacitor
• Notice included
• Supplied with 3 screws for fixing the plate
• Instructions included

• Female connector: Ø 3/8"-24UNF (Ø 9.52mm) x3

The kit consists of the following pipes:

• Right front underbody pipe (with tappings for heating circuit): Lower radiator hose / central underbody connector - Part number 42569E
• Left front underbody pipe: Upper radiator hose / central underbody connector - Part number 42584A
• Right rear underbody pipe: Central underbody connector / hose to water pump - Part number 30238A
• Left rear underbody pipe: Central underbody connector / Hose to water pipe on cylinder head - Part number 30230E

This kit of 4 pipes is compatible for installation on a Simca Rallye 2 and a Simca 1200S, provided that the long fixing bracket of the right rear tube is replaced by a short "Type Rallye 3" bracket on the tank ventilation plate (see photo 2).